Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Abstract
W pracy przedstawiono staw biodrowy jako idealne biołożysko. Omówiono przyczyny
uszkodzenia naturalnego stawu biodrowego człowieka oraz sposoby przywrócenia
utraconych funkcji, w tym alloplastykę stawów. W części badawczo-
-analitycznej pracy omówiono przyczyny obniżenia trwałości endoprotez stawu
biodrowego w oparciu obadania własne in vitro. Przedmiotem badań było skojarzenie
panewka–główka endoprotezy stawu biodrowego. Powierzchnie badanych elementów zostały przygotowane zgodnie z wytycznymi norm. Badania tribologiczne
przeprowadzono w otoczeniu płynu Ringera. Badania stanu powierzchni
przed i po eksploatacji przeprowadzono na trzech urządzeniach: współrzędnościowej
maszynie pomiarowej, mikroskopie interferometrycznym oraz skaningowym
mikroskopie elektronowym. Wyniki przeanalizowano pod kątem procesów
tribologicznych (mechanizmów zużycia) występujących w skojarzeniu polimerowa
panewka–metalowa główka endoprotezy stawu biodrowego.The paper presents a hip joint as an ideal system. The causes of the damage
to a natural human hip joint and the ways of restoring its lost functions
along with hip joint alloplasty are discussed. In the research part of this
paper, based on in vitro study, the reasons for the loss of artificial hip joint
durability are described. The subject of the research was the socket-andball
friction pair, making the elements of a hip joint endoprosthesis. The
surfaces of the analysed samples were prepared in accordance with the
guidelines of the standards. The tribological tests were conducted in the environment of Ringer's solution. The examination of the surface
topography before and after tribological tests was carried out with three
units: a coordinate measurement machine, white light interferometry, and
a scanning electron microscope. The results were analysed in terms of
tribological processes (wear mechanisms) occurring in the friction pair
consisting of the polymer socket and the metal head of a hip joint
endoprosthesis