This research aimed at studying the optimization of process variables for the production of quality foam mat-dried tomato. The method of drying used for this study is foam mat drying and oven drying which serves as the control. For this study, Box-Behnken experimental design of response surface methodology (RSM) was used for designing the experiments. The independent variables selected for the foam mat drying were acacia gum (1 - 3 %) as foam stabilizer, temperature (60 -80 oC) and weight of tomato pulp (170, 190 and 210 g/m2). While for the controls were just dried at different temperature ranges of 60, 70 and 80 oC. The fresh ripe tomato was washed, desked, cut into smaller pieces, pulped before adding the foaming agent and stabilizer then whipped for 7 min and dried in a rectangular tray at 60, 70, 80 oC, scarped, milled and packaged in air tight container. Lycopene, total sugar, ascorbic acid, beta-carotene, and total soluble solids ranged from 2.87 – 11.80 mg/100g, 0.0002 – 0.0012 mml/L, 121.01 – 127.50 mgL-1, 1.40 – 2.47 mg, 4.60 – 7.27oBrix respectively and their controls ranged from 6.79 – 9.26 mg/100g, 0.0001 – 0.0008 mml/L, 60.13- 70.81 mgL-1, 0.56 – 0.83 mg and 0.80 – 1.60oBrix respectively. Keywords: Foam Mat Dried Tomato Powder; Process Variables; Chemical Properties; Lycopene; Correlation; Optimization; Face Centered Composite Design. DOI: 10.7176/FSQM/121-06 Publication date: April 30th 2023
