Improving sustainability is a key concern for industrial development. Industry has recently been benefiting from the rise of IoT technologies, leading to improvements in the monitoring and breakdown prevention of industrial equipment. In order to properly achieve this monitoring and prevention, visualization techniques are of paramount importance. However, the visualization of real-time IoT sensor data has always been challenging, especially when such data are originated by sensors of different natures. In order to tackle this issue, we propose a methodology that aims to help users to visually locate and understand the failures that could arise in a production process.This methodology collects, in a guided manner, user goals and the requirements of the production process, analyzes the incoming data from IoT sensors and automatically derives the most suitable visualization type for each context. This approach will help users to identify if the production process is running as well as expected; thus, it will enable them to make the most sustainable decision in each situation. Finally, in order to assess the suitability of our proposal, a case study based on gas turbines for electricity generation is presented.This work has been co-funded by the ECLIPSE-UA (RTI2018-094283-B-C32) project funded by Spanish Ministry of Science, Innovation, and Universities and the DQIoT (INNO-20171060) project funded by the Spanish Center for Industrial Technological Development, approved with an EUREKA quality seal (E!11737DQIOT). Ana Lavalle holds an Industrial PhD Grant (I-PI 03-18) co-funded by the University of Alicante and the Lucentia Lab Spin-off Company
