IWSHM-RS 2018, 2nd International Workshop on Structural Health Monitoring for Railway Systems, Qingdao, CHINE, 17-/10/2018 - 19/10/2018Track circuits play a major role in railway signaling. In some exceptional conditions, poor rail/wheel contact conditions may lead to a non-detection of the train on the zone. A presentation of the principle of detection by track circuits is proposed to introduce the existing detection criterion. The aim of the paper is first to present new detection approaches based on signal processing on an experiment with a dedicated train running on a track equipped with a track circuit. The second objective is to present a strategy to test new detection criteria on commercial zones over a long period of time (a few months) with the help of the PEGASE acquisition board. PEGASE has been developed by IFSTTAR and the presented work is the result of SNCF/IFSTTAR collaboration

Kerbal, Sofiane

Le Cam, Vincent

Lemarchand, Laurent

Lorang, Xavier

Mogoro, Jean-Jacques

INRIA a CCSD electronic archive server

HAL Id: hal-01898678https://hal.inria.fr/hal-01898678Submitted on 18 Oct 2018HAL is a multi-disciplinary open accessarchive for the deposit and dissemination of sci-entific research documents, whether they are pub-lished or not. The documents may come fromteaching and research institutions in France orabroad, or from public or private research centers.L’archive ouverte pluridisciplinaire HAL, estdestinée au dépôt et à la diffusion de documentsscientifiques de niveau recherche, publiés ou non,émanant des établissements d’enseignement et derecherche français ou étrangers, des laboratoirespublics ou privés.New detection criteria and shunting monitoring inrailway track circuit receiversXavier Lorang, Sofiane Kerbal, Laurent Lemarchand, Vincent Le Cam,Jean-Jacques MogoroTo cite this version:Xavier Lorang, Sofiane Kerbal, Laurent Lemarchand, Vincent Le Cam, Jean-Jacques Mogoro. Newdetection criteria and shunting monitoring in railway track circuit receivers. IWSHM-RS 2018 - 2ndInternational Workshop on Structural Health Monitoring for Railway Systems, Oct 2018, Qingdao,China. pp.1-10. ￿hal-01898678￿New detection criteria and shunting monitoring in railway track circuit receivers Authors:Xavier LORANG, Sofiane KERBAL, Laurent LEMARCHAND, Vincent LE-CAM, Jean-Jacques MOGOROABSTRACTTrack circuits play a major role in railway signaling. In some exceptional conditions,poor rail/wheel contact conditions may lead to a non-detection of the train on the zone.A presentation of the principle of detection by track circuits is proposed to introducethe existing detection criterion. The aim of the paper is first to present new detectionapproaches  based  on  signal  processing  on  an  experiment  with  a  dedicated  trainrunning on a track equipped with a track circuit. The second objective is to present astrategy to test new detection criteria on commercial zones over a long period of time(a few months) with the help of the PEGASE acquisition board. PEGASE has beendeveloped by IFSTTAR and the presented  work is  the result  of  SNCF/IFSTTARcollaboration.INTRODUCTION - PROJECT CONTEXTActors:IFSTTAR is  the  French National  Institute  of  Science  and  Technology  forTransport,  Developments  and  Networks  which  dedicates  a  significant  part  of  itsresearch  and  developments  to  railways  applications.  Those  national,  European  orinternational  research  projects  and  expertise  cover  various  fields  from  CivilEngineering studies or Structural Monitoring combining instrumentation to structuralmodeling.SNCF is the national company of the French rail network since January 1938.Its  main  activities  are  the  carriage  of  passengers,  the  transport  of  freight,  theexploitation of the rail network and the management of railway infrastructures. Everyyear in France, 149,500 collaborators contribute to transport 2 billion passengers on30,000 km. Some of these employees are related to the management of engineering tocontinue to deploy the network and develop innovative solutions._____________Xavier Lorang, SNCF, Innovative & Research Department, 40 avenue des terroirs de France, 75611 Paris Cedex 12, FranceSofiane Kerbal, ITG for SNCF, Innovative & Research Department, 40 avenue des terroirs de France, 75611 Paris Cedex 12, FranceVincent Le-cam, Laurent Lemarchand, IFSTTAR Nantes, SII Laboratory Department CoSys,Inria I4S  team,  Allée des Ponts et Chaussées, Route de Bouaye - CS4 44344 Bouguenais FRANCEJean-Jacques Mogoro,SNCF Réseau, Signaling Department, 6, avenue François Mitterrand 93574 La plaine Saint Denis CedexProject:Shunting malfunction which is a consequence of a poor wheel/rail contact is rare.SNCF is working on taking into account this phenomenon for existing installations.New detection criteria are considered into track circuits receivers. The work presentedhere is the result  of a collaboration between SNCF and IFSTTAR. IFSTTAR hasdeveloped the PEGASE acquisition board to help SNCF perform shunting monitoringon a commercial context for the test of these new criteria.1 – Principle of detection by track circuitsa) Principles : the Automatic Block SignalingIn  order  to  prevent  the  collision  between trains,  each  line  of  the  French railwaynetwork is divided into sections, in which the presence of one train at most is allowed.The system used to control the traffic on the railway lines is called Automatic BlockSignaling (ABS). Whenever a train enters a “block”, the ABS detects it and conveysthe information that the block is occupied to the approaching trains (Figure 1).The train detection in a block is performed by an electrical device called track circuit. Figure 1: Automatic block signaling in the French railway networkTrack circuits play a crucial role in railway signaling because they allow permanentand automatic detection of the trains anywhere on the railway network. Their lengthsvary from 800 m to 2,500 m.A track circuit consists of 3 main elements:An emitter, connected to one end of the track circuit.  It supplies a currentwhose properties vary depending on the type of track circuit;A transmission line consisting of the rails used as electrical conductors;A receiver,  connected  to  the  other  end of  the  track  circuit.  It  ensures  thefiltering, the amplification and the shaping of the signal received through the rails topower a relay.When no train  is  present,  the emitter  sends an electrical  message  to  the receiverthrough the rails, as shown in Fig. 2a. When a train enters the track circuit, its wheelsand axles short-circuit the rails: the electrical message is no longer transmitted to thereceiver, as shown in Fig. 2b. The short circuit provoked by the axle of the train iscalled shunt.Figure 2: Shunting of the track circuit by the axle of the trainIn case a train is present in the block or a rail is broken, the receiver detects theabsence of electrical message and the light turns red. Track circuit insulationIn order to detect trains in well-defined sections, track circuits must be insulated fromone another. Depending on the type of track, the insulation can be either physical orelectrical.  In  the  case  of  physical  separation,  the  rails  are  cut  and maintained  inposition using screwed joint bars. The block separation is performed using insulatedjoints. However, these are liable to mechanical failure and maintenance and noise. Electrical insulationMost modern railways use Continuous Welded Rails (CWR). In this type of track, therails are welded together to form one continuous rail that can be several kilometerslong. CWRs provide smoother rides, less noise and require less maintenance.In France, a common track circuit used in this jointless configuration is the UM71, inwhich the emitter sends a frequency modulated signal to the receiver. To form distinctsections in this case, UM71s are electrically insulated from one another.To prevent the signal from one block passing into the adjacent block, LC filters tunedto the carrier frequency are placed at the section boundaries (blue rectangles in Fig 3). On the same track, the UM71 track circuits use two carrier frequencies FA and FB forthe emitted signals (the frequencies are near 2 kHz). Figure 3: UM71 track circuits and the spatial arrangement of the different carrierfrequenciesb) Frequency modulation in UM71 track circuitsUM71 track circuits use a common digital Frequency Modulation technique calledFrequency-Shift Keying (FSK) modulation [3,4].(a) (b)The principle of FSK modulation is to transmit digital information (modulating signal)through discrete  frequency changes  of  a  carrier  signal  (modulated  signal).  In  theUM71, the transmitted information is binary: the frequency of the carrier  wave isvaried between two frequencies f1 and f2. The switching between f1 and f2 is performedby a switched oscillator, whose output is connected to a clock that changes states every64 periods, thus creating the modulating square signal. Theoretically, the phase of thecarrier wave should be continuous: this attribute is desirable because discontinuities ina signal introduce wideband frequency components. However, discontinuities are hardto avoid in practice.Figure 4 details how an FSK modulated signal is generated. For display purposes, thesignal plotted in the figure contains different frequencies than in an actual UM71. Inthe example depicted in Figure 4, we have:Where fc indicates the carrier frequency and sm (t) the modulating (message) signal. Ifwe note s1 (t) (resp. s2 (t)) the sine wave with frequency f1 (resp. f2), the FSK signalcan be written as:Figure 4: FSK modulated signalFigure  5  displays  the  spectrum  of  a  signal  measured  in  a  UM71  in  which  thetransmitter’s carrier frequency varies around 2 000 Hz. Figure 5: Spectrum of a signal transmitted in a UM71 track circuitc) Track circuit ReceiverThe existing detection system, based on the signal drop when a train enters a trackcircuit, may prove defective in exceptional circumstances. Before activating the relay, the electrical signal is processed in the receiver. An amplifier in the receiver is used to adjust the voltage of the track depending on theconfiguration of the track circuit (e.g. its length). This allows having the same order ofmagnitude for the voltage irrespective of the track circuit throughout the network.A band-pass filter, whose bandwidth is centered on the carrier frequency of the trackcircuit emitter, ensures that the spurious frequencies are filtered out. The RMS voltageis then computed and analyzed in the thresholding circuit shown in Figure 6.As depicted in Figure 6, an RMS voltage level:• Less than 160 mV causes the activation of the track relay;• Greater than 220 mV causes the deactivation of the track relay.Figure 7 displays the RMS voltage of a signal across a UM71. By convention, anRMS level above 60 mV indicates a high level of residual voltage caused by a poorshunting of the track circuit. The lower (resp. upper) limit of the threshold circuit aremarked by the orange (resp. yellow) dashed line. The train is:• detected if the RMS voltage drops below the  yellow (red) dashed line (160mV);• not detected if the RMS voltage crosses the purple (yellow) dashed line (220mV).Figure 6: Thresholding circuit and hysteresis in the UM71 receiverFigure 7: RMS level of a received track signal2 - Test of new criteria in severe wheel/rail conditionsa) Presentation of the experimentationThe  goal  of  the  experimentation  is  to  artificially  create  the  conditions  of  poorwheel/rail contact and try to detect a train rolling on the track equipped with a trackcircuit with the help of a new criterion. The chosen track is not commercial and is atest zone where trains rarely travel. The track has a high level of oxidation. In addition,leaves are intentionally crushed on a zone. The evolution of residual voltage as afunction of time is plotted in Figure 8a during the pass-by of the dedicated train on thezone.The observation of the evolution of the residual voltage shows that from 150 to 300 s,the RMS voltage increases from 50 to 380 mV, crossing the threshold of 220 mV. Thetrain is lost here due to presence of leaves and oxidation.The idea here is to find new criteria based on signal processing that can help to detecta train on the zone. b) Proposition of a new criterion : power in a spectral band centered on the 3rd Order Harmonic (3OH)The principle of this approach is to follow the evolution of the 3OH in a signal overtime. The motivation is based on the observation that in the case of a poor rail/wheelcontact, the voltage in parallel of the wheelset appears to be a deformed sinus signal.Construction of the criterionThe method consists in estimating the power P of a received signal in a spectral bandcentered on the 3OH using a sliding window.The same processing is done with a signal of reference,  which is chosen to be asegment of signal when the track is unoccupied, to get the power . Because there isnoise in the signal, the mean of ,  is considered. The criterion  is defined asfollows:Detection thresholdFinally, a threshold is computed from the reference . In order to include the noisein the signal when the track is unoccupied, 4 has been chosen for the threshold,where  is the standard deviation of Pref.Results on a signal measured in severe shunting conditionsFigure 8b shows the evolution of the criterion C1 as a function of time. This criterionleads  to  a  detection  of  the  train  in  the  oxidation  zone (around  ),  where  theexisting criterion (based on a thresholding of the residual voltage)  is  found to beineffective.The detection of the train in the leaves zone still remains difficult.Figure 8: (a) Residual voltage (in ). The red dashed line represents the threshold ofthe existing criterion – (b) Criterion of average power in a spectral band centered onthe 3OH (in ). The detection threshold is represented by the red dashed line.3 – Perspectives for the test of new criteria on commercial lines with PEGASEplatformIn the  previous  section,  the  test  of  new detection  criteria  has  been conducted  onexperimental data from a specific acquisition system which cannot allow to get dataon a commercial context for a very long period of time.The strategy is to deploy a PEGASE platform [1,2] system on some commercial sitesand to collect actual data for several months.Focus on IFSTTAR "PEGASE 2 platform": Generic Wireless mother boardPEGASE 2 platform is a mature product developed by IFSTTAR and sold viathird-party  companies.  PEGASE is  the  commercial  name of  a  Generic  WirelessSensor Platform  conceived and designed by IFSTTAR since 2008. The PEGASEconcept is essentially based on a generic vision of its hardware and software abilities.Hardware genericity is  provided by a principle  of mother and pluggable daughterboards.  The  PEGASE  mother  board  -described  below-  integrates  most  commonfunctions  of  typical  wireless  systems:  ensure  computation,  manage  energy,  offermultiple I/Os and wireless communications. Each pluggable daughter board adds aspecific function to the mother board (figure 9), such as 8-analog/digital  channels(figure 10), 3/4G GSM extension, or inertial measurements.  Software genericity isembedded  through  a  small  Linux  Operating  System  added  to  an  open  SingleDevelopment Kit (SDK) given in open-source in object-oriented languages.Presence of leavesFigure 9:  Generic wireless sensorplatform PEGASE 2Figure 10: channel analog daughter board to collect “real” dataPEGASE 2 is not only a more efficient electronic device, but the concept also includesgeneric cloud supervision software that allows operating various sensors.In the context of investigation of new criteria, PEGASE 2 will be connected to thetrack circuit receiver to acquire:- the voltage time signal at the receiver terminals sampled at 32 kHz- the status of the track relay A set of criteria will be computed in the platform and the results will be sent to thecloud supervision software. The database will help to propose new criteria and toupdate it remotely in PEGASE platforms.ConclusionsA new detection criterion has been proposed and evaluated on a dedicated test. Thistest has shown that progress can be made in the detection of trains in case of poorquality of the wheel/rail contact. The PEGASE platform and the way it will be usedfor  a  test  of  new criteria  in  commercial  conditions  for  a  long period  have  beenpresented.REFERENCES[1] V. Le Cam, L. Lemarchand, W. Martin, N. Bonnec. Improving wireless sensor behavior by meansof generic strategies. EWSHM, Sorrento, Italy, 2010.[2] V. Le Cam, M. Döhler, M. Le Pen, L. Mevel. Embedded modal analysis algorithms on the smartwireless sensor platform PEGASE. IWSHM, Stanford, CA, USA, 2013.[3] SNCF (IG.SF): Récepteur numérique pour Circuit de Voie UM 71 C TVM. CT n°554 (EF 5 B32/314), édition du 14/06/2011.[4] Jean-Pierre POITEVIN: Licence Professionnelle en Etudes de Signalisation Ferroviaire. ModuleCircuit de Voie, Circuit de Retour du Courant de Traction et Compatibilité électromagnétique. LeCircuit de voie UM 71. Edition du 08/12/2014.[5] Alexandra  DEBIOLLES:  Diagnostic  de  systèmes  complexes  à  base  de  modèle  interne,reconnaissance des formes et fusion d’informations. Application au diagnostic des Circuits de Voieferroviaires. Thèse présentée pour l’obtention du grade de docteur, Université de Technologie deCompiègne, 2007.

New detection criteria and shunting monitoring in railway track circuit receivers

https://hal.inria.fr/hal-01898678/file/ArticleIWSHMRS.pdf

New detection criteria and shunting monitoring in railway track circuit receivers

Abstract

Similar works

Full text

Available Versions

INRIA a CCSD electronic archive server