Indonesia, as the

largest palm oil producer in the world, also produces palm oil mill effluent

(POME). While the latter is a liquid waste that is hazardous for the

environment, with proper processing, it can be a potential energy source. The

objective of this study was to study the performance of biogas production from

POME at various temperatures. The POME and sludge mixture was fermented,

according to the treatment, at 27-28oC, 45oC, and 55oC,

with the results showing that methane could thereby be produced by as much as

0,19 m3, 0,25 m3, and 0,28 m3 respectively.

For each kilogram of chemical oxygen demand (COD) removal, with POME

fermentation at room temperature, 45oC, and 55oC, biogas

could be produced with methane content of 65.44%, 62.57%, and 59.15%,

respectively

Ono  Suparno

Sarono

Suprihatin

Udin  Hasanudin

International Journal of Technology

Directory of Open Access Journals

International Journal of Technology (2016) 8: 1413-1421 ISSN 2086-9614 © IJTech 2016     THE PERFORMANCE OF BIOGAS PRODUCTION FROM POME AT DIFFERENT TEMPERATURES  Sarono1*, Ono Suparno2, Suprihatin2, Udin Hasanudin3  1Department of Agricultural Technology, The State Polytechnic of Lampung, Lampung 35144 Indonesia 2Department of Agro-Industrial Technology, Faculty of Agricultural Technology and Engineering, Bogor Agricultural University, West Java 16680, Indonesia 3Department of Agro-Industrial Technology, Faculty of Agriculture, Lampung University, Lampung 35141, Indonesia  (Received: November 2016 / Revised: December 2016 / Accepted: December 2016)  ABSTRACT Indonesia, as the largest palm oil producer in the world, also produces palm oil mill effluent (POME). While the latter is a liquid waste that is hazardous for the environment, with proper processing, it can be a potential energy source. The objective of this study was to study the performance of biogas production from POME at various temperatures. The POME and sludge mixture was fermented, according to the treatment, at 27-28oC, 45oC, and 55oC, with the results showing that methane could thereby be produced by as much as 0,19 m3, 0,25 m3, and 0,28 m3 respectively. For each kilogram of chemical oxygen demand (COD) removal, with POME fermentation at room temperature, 45oC, and 55oC, biogas could be produced with methane content of 65.44%, 62.57%, and 59.15%, respectively.  Keywords:  Biogas; Fermentation temperature; Methane gas; POME  1. INTRODUCTION The process of oil extraction from palm oil requires significant quantities of water to steam-sterilize the palm fruit bunches and clarify the extracted oil. Oil palm mill plants also demand large amounts of water for their operation and discharge considerable quotas of liquid waste or palm oil mill effluent (POME). For each ton of crude palm oil (CPO) produced, an average of 0.91.5 m3 of POME is generated (Saidu et al., 2013); or to put it another way, about 2.53.0 tons of POME per ton of produced CPO is obtained in the extraction process (Borja & Banks, 1994a). POME is a colloidal suspension containing 9596% water, 0.60.7% oil, and 45% total solids, including 24% suspended solids (Wu et al., 2007). The biological oxygen demand (BOD), chemical oxygen demand (COD), oil and grease, total solids, and suspended solids in POME range from 23,50029,300 mg/L, 49,00063,600 mg/L, 8,3708,500 mg/L, 26,50045,400 mg/L, and 17,10035,900 mg/L respectively (Saidu et al., 2013). POME with an average COD and BOD of 70,000 and 30,000 mg/L, respectively, can cause serious environmental hazards if discharged untreated (Chan et al., 2012). However, it contains methane, a flammable gas with high potential for use as a source of renewable energy. Khemkhao et al. (2012) stated that POME with organic loading rates (OLR)                                                      *Corresponding author’s email: saronotipipb@yahoo.com, Tel. +62812-7926151, Fax. +62-721-703995 Permalink/DOI: https://doi.org/10.14716/ijtech.v7i8.6896 1414 The Performance of Biogas Production from Pome at Different Temperatures  of between 2.29.5 g of COD per liter per day, with an overhaul anaerobic, can produce 13.2 liters of biogas each day. According to Tong (2011), a palm oil mill with a production capacity of 60 tons of fresh fruit bunches (FFB) per hour or 360,000 tons of FFB per year will yield as much as 216,000 m3 of POME per year, with a total COD of 10,800 tons per year.  To date, Indonesian palm oil factories have not made serious efforts to capture and deploy methane gas, due to the prohibitive investment cost and low practicality. Previous studies have shown that biogas production from POME at room temperature is sub-optimal, as the amount of methane produced is negligible (< 0.35 L per g of COD) and takes an unreasonably long time. The objective of the present research was therefore to study the performance of biogas production from POME at different temperatures. The expected benefit to be obtained from this study was a mapping of the implementation of technological use of POME to become electrical energy.  2. METHODS The experiment was conducted using three anaerobic bioreactors, according to the “Bench Scale Advance Methane Fermentation Model AR-50L-3,” with a capacity of 50 L each and featuring a stirrer and automatic temperature control, as shown in Figure 1a. During the fermentation, gas produced was measured continuously using a gas flow meter “Wet Gas Meter; Model W-NK 0.58,” as shown in Figure 1b. POME and sludge were obtained from PTPN VII Bekri, Central Lampung.   Figure 1 (a) Anaerobic bioreactors “Bench Scale Advance Methane Fermentation”;  (b) Gas flow meter  The temperatures deployed were 2728oC (room temperature), 45±3oC and 55±3oC. A stirring speed of 100 rpm was used at 45oC and 55oC, while the bioreactors with manual stirring were used for the treatment conducted at room temperature. The procedure was carried out three times per day, each time stirring for five minutes. This was in accordance with the actual conditions present in the field. The substrate was formed from a mixture comprising 80% POME and 20% sludge; such a combination determined an adjustment or lag phase in the fermentation process. We began the study by characterizing the sample, which included mixed POME and sludge to the proportions mentioned above. Then, the mixture was fermented at different temperatures according to the treatment. The experiment was terminated if the COD value of the effluent was less than 10,000 mg/L. The stages of the research can be observed in Figure 2. Sarono et al. 1415  The parameters noted during fermentation were biogas production, temperature, pH, COD and composition of biogas (CH4, CO2, and N2). Biogas production was measured using a gas flow meter (WK-NK-0.5B, Shinagawa Corporation, Japan). The composition of the gas was analyzed using gas chromatography (Shimadzu GC 2014) with a thermal conductivity detector (TCD) and a shin-carbon column of four meters’ length; pH was measured using a gas pH meter (DKK-TOA Corporation, Japan), while COD value measurement was conducted using HACH Spectrophotometry DR4000 (HACH Company, Japan) at 620 nm wave length. Biogas production and temperature were measured every day, while the pH, COD, and gas composition were measured every seven days.   Figure 2 Stages of the research  3. RESULTS AND DISCUSSION 3.1. Production Pattern of Biogas Figure 3 shows the daily biogas production at temperatures of 55oC, 45oC, and 2728oC during the study period. The lag phase of biogas production at room temperature (2728oC) reached 151 days, while at 45oC this was 25 days, and at 55oC there were active microorganisms that were directly producing the biogas, which were reconfiguring the group anaerobes, were thermophilic microorganisms such as Methanosarcina, Methanococcus, Methanobacterium, and Methanobacillus (Weiss et al., 2011).   1416 The Performance of Biogas Production from Pome at Different Temperatures    Figure 3 The pattern of biogas production from POME at different fermentation temperatures  3.2. The Acidity Level (pH) of POME The pH value of POME during fermentation at different temperatures is shown in Figure 4. The initial measurement demonstrated that the fresh POME being emitted from the factory had a pH value of 5.635.64; meanwhile, the sludge taken from the end of the anaerobic pond had a pH value of 8.158.18. After mixing with 80% POME and 20% sludge, the pH value was 6.276.29. According to Saidu et al. (2013), POME is a creamy brown colloid with a pH of 45, which is affected by the quality of the raw materials (FFB). Under controlled conditions, the temperature rise will accelerate the growth of active microorganisms, especially thermophilic varieties such as Methanosarcina, Methanococcus, Methanobacterium, and Methanobacillus (Weiss et al., 2011). Meanwhile, the microorganisms that grow at mesophilic temperatures are Streptococcus (approximately 50%), Lactobacillus (approximately 30%), and the Clostridium group (approximately 20%).   Figure 4 The changes in the pH value of POME during fermentation at different temperatures  3.3. COD and COD Removal The reduction of COD values, when conducted at 55oC, was faster than when conducted at 45oC and 2728oC (Figure 5). This phenomenon was caused by the microorganisms derived Sarono et al. 1417  from sludge POME, which were categorized as thermophilic; similar results were reported by other researchers (O-Thong et al., 2008). In this research, the microorganism source was 20% sludge (10 liters). Such sludge tends to contain many bacteria, such as Clostridium, Escherichia coli, and Enterobacter (Chen et al., 2005; Chong et al., 2009). Some studies have shown that these thermophilic microorganisms are widely found in soil, sludge, and compost (Hu & Chen, 2007; Wang & Wan, 2008).   Figure 5 The decreasing pattern of COD value at different fermentation temperatures  The decrease in COD values indicated the decomposition of organic material into simpler substances. The organic materials contained within the POME were complex compounds, such as carbohydrates, proteins, and fats (Poh & Chong, 2009), while the simple compounds resulting from the fermentation process were formic acid, acetate, propionate, butyrate, lactate, succinate, ethanol, carbon dioxide, and hydrogen gas (Poh & Chong, 2009). The results show that the COD removal at 55oC was greater than at 45oC and room temperature (2728oC) (Figure 6).   Figure 6 COD removal from POME at different fermentation temperatures  3.4. Methane Productivity The results show that the methane productivity from POME varied between different temperatures, as shown in Figure 7. Fermentation at 55oC produced more biogas (0.28 L for each g of COD removal), while a temperature of 45ºC and room temperature yielded 0.25 L and 0.24 L, respectively. A stoichiometric estimation of each g of COD would produce 0.35 L methane gas. This shows that the biogas produced was less than the stoichiometric estimation. 1418 The Performance of Biogas Production from Pome at Different Temperatures  This was caused by the imperfect methanogenesis process, resulting in significant formation of CO2.   Figure 7 The patterns of biogas production from POME at different fermentation temperatures  A fermentation temperature of 55oC produced biogas with a methane content that was higher than that yielded at 45oC and room temperature (Figure 8). Choi et al. (2013) reported that the use of a high-rate anaerobic reactor in the POME process could produce biogas with a yield of 0.171 to 0.269 L per g of COD, while methane concentration may reach 59.578.2%. In addition, the 55oC fermentation temperature produced biogas with fewer impurities (CO2 and N2) than what was yielded at 45oC and room temperature. It is very important when producing biogas as fuel, especially for electrical energy, to remove carbon dioxide; such a measure could increase the biogas’ quality and raise the heating energy point (Kapdi et al., 2005). Some results of COD removal and the methane gas content of POME can be seen in Table 1.   Figure 8 The biogas composition generated from POME fermentation at different temperatures     Sarono et al. 1419  Table 1 Research studies on the reduction of COD and methane capture from POME Methods COD removal efficiency (%) Highest methane composition (%) Reference Anaerobic filtration 94.00 63.00 Borja and Banks (1994a) Anaerobic filtration 94.00 63.00  Borja and Banks (1994b) UASB reactor (based on methanogenic reactor) 96.7–98.4 54.2–62.0 Borja and Banks (1994b) UASB 98.40 54.20 Borja and Banks (1994a) Fluidized bed reactor 78.0–94.0 N/A Borja and Banks (1995a) Fluidized bed 78.00 N/A  Borja and Banks (1995b) UASFF in various wastewater treatments 89.5–97.5 62.0–84.0 Najafpour et al. (2006) Anaerobic pond 97.80 54.40 Yacob et al. (2006) Anaerobic digester 80.70 36.00 Yacob et al. (2005) CSTR 80.00 62.50 Tong and Jaafar (2006) CSTR at 55oC 86.86 67.58 Results of research CSTR at 45oC 84.31 67.58 Results of research Bioreactors in which manual stirring was performed three times per day, for five minutes at a time, at 27-28oC  57.25 60.70  Results of research N/A: data unavailable  4. CONCLUSION POME fermentations at 55oC, 45oC, and room temperature (2728oC) can produce methane of as much as 0.28 m3, 0.25 m3, and 0.19 m3, respectively for each kg of COD removed. POME fermentation at 55oC, 45oC, and room temperature can produce biogas with methane contents of 65.44%, 62.57%, and 59.15%, respectively.  5. ACKNOWLEDGEMENT The authors thank the Directorate General of Higher Education of the Ministry of Education and Culture for the financial support for this research through the Pemprinas scheme of MP3EI, as well as the Agro-Industrial Technology Department, Faculty of Agriculture, UNILA, and Analytical Laboratories POLINELA.  6. REFERENCES Borja, R., Banks, C.J., 1994a. Anaerobic Digestion of Palm Oil Mill Effluent Using an Up-Flow Anaerobic Sludge Blanket Reactor. Biomass and Bioenergy, Volume 6(5), pp. 381389 1420 The Performance of Biogas Production from Pome at Different Temperatures  Borja, R., Banks, C.J., 1994b. Treatment of Palm Oil Mill Effluent by Upflow Anaerobic Filtration. Journal of Chemical Technology and Biotechnology, Volume 61(2), pp. 103109 Borja, R., Banks, C.J., 1995a. Response of an Anaerobic Fluidized Bed Reactor Treating Ice-Cream Wastewater to Organic, Hydraulic, Temperature and Ph Shocks. Journal of Biotechnology, Volume 39(3), pp. 251259 Borja, R., Banks, C.J., 1995b. Comparison of an Anaerobic Filter and an Anaerobic Fluidized Bed Reactor Treating Palm Oil Mill Effluent. Process Biochemistry, Volume 30(6), pp. 511521 Chan, Y.J., Chong, M.F., Law, C.L., 2012. An Integrated Anaerobic-Aerobic Bioreactor (IAAB) for the Treatment of Palm Oil Mill Effluent (POME): Start-Up and Steady State Performance. Process Biochemistry, Volume 47(3), pp. 485495 Chen, W-M., Tseng, Z-J., Lee, S., Chang, J-S., 2005. Fermentative Hydrogen Production with Clostridium Butyricum CGS5 Isolated from Anaerobic Sewage Sludge. International Journal of Hydrogen Energy, Volume 30(10), pp. 10631070 Choi, W-H., Shin, C-H., Son, S-M., Ghorpade, P.A., Kim, J-J., Park, J-Y., 2013. Anaerobic Treatment of Palm Oil Mill Effluent using Combined High-rate Anaerobic Reactors. Bioresource Technology, Volume 141, pp. 138144 Chong, M-L., Rahim R.A., Shirai, Y., Hassan, M.A., 2009. Biohydrogen Production by Clostridium Butyricum EB6 from Palm Oil Mill Effluent. International Journal of Hydrogen Energy, Volume 34(2), pp. 764771 Hu, B., Chen, S., 2007. Pretreatment of Methanogenic Granules for Immobilized Hydrogen Fermentation. International Journal of Hydrogen Energy, Volume 32(15), pp. 32663273 Kapdi, S.S., Vijay, V.K., Rajesh, S.K., Prasad, R., 2005. Biogas Scrubbing Compression and Storage: Perspectives and Prospectus. Renewable Energy, Volume 30(8), pp. 11951202 Khemkhao, M., Nuntakumjorn, B., Techkarnjanaruk, S., Phalakornkule, C., 2012. UASB Performance and Microbial Adaptation during a Transition from Mesophilic to Thermophilic Treatment of Palm Oil Mill Effluent. Journal of Environmental Management, Volume 103, pp. 7482 Najafpour, G.D., Zinatizadeh, A.A.L., Mohamed, A.R., Hasnain Isa, M., Nasrollahzadeh, H., 2006. High-Rate Anaerobic Digestion of Palm Oil Mill Effluent in an Upflow Anaerobic Sludge-Fixed Film Bioreactor. Process Biochemistry, Volume 41(2), pp. 370379 O-Thong, S., Prasertsana, P., Intrasungkha, N., Dhamwichukorn, S., Birkeland, N-K., 2008. Optimization of Simultaneous Thermophilic Fermentative Hydrogen Production and COD Reduction from Palm Oil Mill Effluent by Thermo Anaerobacterium-Rich Sludge. International Journal of Hydrogen Energy, Volume 33(4), pp. 12211231 Poh, P.E., Chong, M.F., 2009. Development of Anaerobic Digestion Methods for Palm Oil Mill Effluent (POME) Treatment. Bioresource Technology, Volume 100(1), pp. 19 Saidu, M., Yuzir, A., Salim, M.R., Salmiati, Azman, S., Abdullah, N., 2013. Influence of Palm Oil Mill Effluent as Inoculum on Anaerobic Digestion of Cattle Manure for Biogas Production. Bioresource Technology, Volume 141, pp. 174–176 Tong, S.L., 2011. Recent Developments on Palm Oil Mill Residues Biogas Recovery and Utilisation. In: Proceedings of the International Conference and Exhibition of Palm Oil, Jakarta, 11-13 May Tong, S.L., Jaafar, A.B., 2006. POME Biogas Capture, Upgrading and Utilization. Palm Oil Engineering Bulletin, Volume 78, pp. 1117 Wang, J.L., Wan, W., 2008. Comparison of Different Pretreatment Methods for Enriching Hydrogen-Producing Cultures from Digested Sludge. International Journal of Hydrogen Energy, Volume 33(12), pp. 29342941 Sarono et al. 1421  Weiss, S., Zankel, A., Lebuhn, M., Petrak, S., Somitsch, W., Guebitz, G.M., 2011. Investigation of Microorganisms Colonising Activated Zeolites During Anaerobic Biogas Production from Grass Silage. Bioresource Technology, Volume 102(6), pp. 43534359 Wu, T.Y., Mohammad, A.W., Jahim, J.Md., Anuar, N., 2007. Palm Oil Mill Effluent (POME) Treatment and Bioresource Recovery Using Ultrafiltration Membrane: Effect of Pressure One Membrane Fouling. Biochemical Engineering Journal, Volume 35(3), pp. 309317 Yacob, S., Hassan, M.A., Shirai, Y., Wakisaka, M., Subash, S., 2005. Baseline Study of Methane Emission from Open Digesting Tanks of Palm Oil Mill Effluent Treatment. Chemosphere, Volume 59(11), pp. 15751581 Yacob, S., Hassan, M.A., Shirai, Y., Wakisaka, M., Subash, S., 2006. Baseline Study of Methane Emission from Anaerobic Ponds of Palm Oil Mill Effluent Treatment. Science of the Total Environment, Volume 366(1), pp. 187196   

The Performance of Biogas Production from Pome at Different Temperatures

https://ijtech.eng.ui.ac.id/download/article/284

The Performance of Biogas Production from Pome at Different Temperatures

Abstract

Similar works

Full text

Available Versions

Directory of Open Access Journals