Cech, Jiri

Taboryski, Rafael Jozef

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 18, 2017Towards Wafer Based Fabrication of Precise Optical Polymer ElementsCech, Jiri; Taboryski, Rafael J.Publication date:2011Document VersionPublisher's PDF, also known as Version of recordLink back to DTU OrbitCitation (APA):Cech, J., & Taboryski, R. J. (2011). Towards Wafer Based Fabrication of Precise Optical Polymer Elements.Poster session presented at PITTCON 2011, Atlanta, Georgia, USA, .Towards Wafer Based Fabrication of Precise Optical Polymer ElementsMotivationUse well established semiconductor fabrication principles ofintegration, parallelization, wafer level manufacturing. This allows tomake more precise, advanced optical design (aspheric) usingautomated processing. Cost for single wafer level camera module(3 lens stack, 3 spacers and 3 MPix sensor) was calculated to be$1.26 with 80% yield.Approach • Make wafer sized master for lens surfaces• Replicate lenses • Prepare wafers with apertures, filters, spacers, • Wafers with CMOS sensors• Readout circutry• Stack, Align, • Bond, Cure it• Dice• Mount to baseboard• TestJirka Cech and Rafael TaboryskiInitial Results with OrmocerJiri.Cech@nanotech.dtu.dk +45 61 79 29 00Department of Micro- and Nanotechnology, DTU Nanotech345 Ørsteds Plads, 2800 Kgs. LyngbyDenmarkConventional camera module consisting of multiple discrete components as opposed to wafer level assemblybased modules, where one prepares 3000 – 4000 dies with complete modules at once on 4” wafer.  Abstract: We aim to develop a processes to form precise free formlens elements on wafer level scale, using PMMA and advanced heat-resistant polymers, capable of a reflow assembly. Such opticalelements can be used to prepare stacked, multi-level cameramodules for the applications in portable electronics, using waferlevel packaging techniques. Calculation shows significant costadvantage over discrete assembly built camera modules.Nanostructured surface of lenses can provide antireflective or self-cleaning properties so nanostructures on lens surfaces were formed.Initial Results with PolystyreneInjection molding modified tool insert.Aluminum tool with microlensesSpecial anti-adhesion coatingSpreading via spin coating Ex-situ UV curingPost-exposure bakeOptical microscopy imagePolymer outside lensesBubbles outside lensesNonconforming shapeMechanical profilometryDiameter 1.0 mmCurvature radius 1.0 mmSag 120-135 microns AcknowledgmentsProject is funded by DTU Nanotech, the Danish NationalAdvanced Technology Foundation (HTF), the CopenhagenGraduate School for Nanoscience and Nanotechnology(C:O:N:T). Lens surface tools have been manufactured by theKaleido Technology ApS, polystyrene injection molding was doneat InMold BioSystems. Autor collaborated with AB Christiansenfrom DTU Nanotech.Nanostructures on double curved surfacePattern created on Injection molded PS substrates with microlenseswas formed by hydrostatic embossing with Obducat 2.5 NIL.  Flexible stamp is 188 micron thick polymer foil from Nickel master. LS Confocal microscopy770 nm pattern periodPattern on  10% sloped surface  with high uniformityStampSampleHeatingEx-situ curing does not warrant sufficient precision, uniformity and yield.Thermally curable composition with suitable optical properties, lowstress, low shrinkage and high temperature resistance would allow touse in-situ curing.Engel e-motion 55 system PS with Tg ~ 100 ºC60 mm disc, 1.5 mm thickLens sag 134 microns Macrostructure deformation as a function of nanoimprintingtemperature

Towards Wafer Based Fabrication of Precise Optical Polymer Elements

http://orbit.dtu.dk/ws/files/5694341/Pittcon2011%5B1%5D.pdf

Towards Wafer Based Fabrication of Precise Optical Polymer Elements

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology