Some Aspects of Cost/ Benefit Analysis for In-Service Inspection of PWR Steam Generators

Abstract

This report discusses a number of aspects of cost/benefit (C/B) analysis for in-service inspection (lSI} of pressurized water reactor (PWR) steam generators (SGs) and identifies several problem areas that must be addressed prior to a full C/B analysis capability. Following a brief review of the impact of SG problems on the productivity of PWR units and of the scope and variability of SG problems among U.S. PWRs, various occupational implications of SG lSI are considered, namely manpower, time, and rad exposure. The opportunities provided by refueling outages in respect to lSI frequency and work time windows are reviewed. Indices for characterizing the nondestructive testing {NDT) information, rad exposure, impact,andmanpowerandtimeattributesofsingleISIsandaseriesofISIsoveranarbitraryevaluationperiodarepresentedandcalculatedforanumberoflSIcasesusingSGparametersforthreetypicalPWRunits.Acomparisonofthe impact, and manpower and time attributes of single ISIs and a series of ISIs over an arbitrary evaluation period are presented and calculated for a number of lSI cases using SG parameters for three typical PWR units. A comparison of the impact of unscheduled outages attributable to SG problems with the costofambitiouslSIstrategiesindicatesthatthe cost of ambitious lSI strategies indicates that the cost is virtually negligible for well-planned ISis. Considering the ALARA constraint on occupational rad exposure, the skilled manpower pool for NDT work appears to be the principal factor limiting lSI scope and frequency. Analysis of the manpower and time requirements for inspection of a 40-unit PWR population indicates, however, that an lSI strategy embodying two campaigns per year and a total population inspection within a 2-year interval is not far beyond current capabilities

    Similar works