As a tropical country, one of the electronic products is quite high level of consumption is the fan. The high number of fan consumption potentially increasing the number of e-waste, in which by it life phase, electronic product generate many environmental impact.environmental impact by each life phase influencing by the design phase. The increased awareness of the importance of environmental protection and the possible impacts have increased interest in the development of methods to better understand and address these impacts. One of the techniques being developed for this purpose is life cycle assessment (LCA).By LCA calculation, it can address the value of environmental impact of each product's life phase, the eco-cost value and the alternative strategy for reducing the environmental impact of the product. From the results of the LCA calculation by eco-cost 2012 method of simapro, between wall fan 16, desk fan 12 and stand fan 16 and stand fan wadesta, show that the eco-cost value of wall fan 16, desk fan 12 and stand fan 16 are Rp. 627.180,00 per unit of product. While the alternative products b integration concept of 3 in 1 product, produce eco-cost value amount Rp. 223,281.00 per unit product. The eco-cost value of wadesta stand fan is smaller cause this product using lesser material and lesser components than if the product stand fan, wall fan and desk fan is a separate unit of product. Stand fan wadesta can reduce the eco-cost value amount Rp.403.360,00 per unit product