The objective of the Morgantown Energy Technology Center (METC) high pressure combustion facility is to provide a mid-scale facility for combustion and cleanup research to support DOE`s advanced gas turbine, pressurized, fluidized-bed combustion, and hot gas cleanup programs. The facility is intended to fill a gap between lab scale facilities typical of universities and large scale combustion/turbine test facilities typical of turbine manufacturers. The facility is now available to industry and university partners through cooperative programs with METC. Currently two combustion rigs are operating and one additional project is under construction for the facility. Space is available in the test cells for at least one additional test rig. A pressurized pulsed combustor began operating in July of 1993. The combustor will carry out pulsed combustion of natural gas at pressures up to 10 atmospheres. A high pressure steady flow rig is currently completely fabricated. The objective of this rig is to test novel, steady-flow, pressurized combustors that produce very low NO{sub x} and other emissions. An evaporation rig currently is in startup. This rig will test the concept of water injection in an externally fired cycle. The specific technical issue that the unit will address is evaporation rates of water droplets in high pressure flows
