The RETPRO project (Validation of Wind Tunnel Test and CFD Techniques for Retropropulsion), as part of ESA’s Future Launchers Preparatory Programme, aims at preparing the tools, necessary for a reliable design and simulation of future rocket launchers or spacecraft. A particular focus is assigned to vertical take-off and landing configurations using retro propulsion as part of their control concept for entry, descent, and landing manoeuvres. Wind tunnel tests and computational fluid dynamics are used to generate a comprehensive aerodynamic database, which is required for flight dynamics simulations, enabling mission and performance analyses of possible future launcher designs. Windtunnel tests are conducted in the DLR Cologne H2K facility, with room temperature dry air ejected through selected nozzles to simulate the exhaust plume. Condensation effects might occur in the plume due to the low static freestream pressure at Mach 7, combined with the expanding flow in the nozzle. This paper presents results from numerical investigations including a vapour-equilibirum model which evaluate the potential influence of plume condensation on measured data in the wind
tunnel. A qualitative comparison between experimental and numerical results is presented through Schlieren photographs. Condensation was observed in the numerical results, causing the flow path in and around the plume to be altered. Surface pressure coefficients in the condensation case were observed to be approximately 5% lower than when using the standard ideal gas model. Finally, the shock stand off distance was reduced, but not significantly. The comparison with tunnel data was therefore more-or-less the same as with the ideal gas model and the use of the condensation model was not deemed necessary for subsequent computations
