AbstractEarthquake disasters are frequent, and the seismic intensity is large in Northeast China. Earthquake activity research is an important aspect of earthquake disaster management. We chose some unconventional means to study fault activity, to find updated activity evidence. The Ms 5.3 earthquake occurred near the Fuyu North Fault (FNF) of China on May 27, 2018. Using the Sentinel-1B descending orbit data from 2016 to 2019, the line-of-sight (LOS) surface deformation in the study area was calculated by using the small baseline subset (SBAS) method. After transforming to the horizontal EW deformation, the variance component estimation method was used for fusion reconstruction with the EW data of the surrounding GNSS stations. The polynomial least square method is used to fit the fault slip rate of three EW data on the surface trace of the FNF. The fitting results of the three regions show that the horizontal eastward distribution rate of the upper plate is significantly greater than that of the lower plate, which is left-lateral clockwise torsion. The vertical structural deformation caused by the growth strata of the upper and lower plates of the upper SYT2 seismic profile of the FNF is quantitatively calculated, and the thrust rate of the upper plate is 0.2 mm/y relative to that of the lower plate. Based on the Li Siguang chessboard structure model, we found that the compression stress in the north-south direction is gradually weakened, and the compression stress in the east-west direction is gradually enhanced. Through the Coulomb stress analysis, the three events of CMT only induced the historical focal location of the surrounding part. The events of 2017 did not induce the events of 2018, but the events of 2019 were related to the induced effects of 2017 and 2018
