The project presented in this paper is geographically set within Sagarmatha National Park, a wide area located on the Nepalese mountainside of Everest and declared as World Heritage Site since 1979. In recent years the park was the focus of several studies and initiatives, aimed at improving the management of its many-sided ecosystem, significantly influenced by climate change and increase of human activities and tourism, which occurred from the end of the 1970s, as well as by practices that are harmful both to human health and to our environment (e.g. burn up kerosene or animal excrements in order to obtain heat). Research work has focused on designing a residential unit that meets population needs, in terms of simplicity of realization, replicability, use of local materials, environmental compatibility and exploitation of available renewable energies. For this purpose a thorough analysis was conducted to identify the housing standard characteristic of reference context and Sherpa people, concerning indoor thermal comfort conditions, construction techniques, availability and skills of local workforce. Data necessary for the design phase were obtained through a collaboration with researchers of Ev-K2-CNR center, active at 5,050 meters a.s.l. in Nepal at the base of Mount Everest with a laboratory/observatory (known as the "Pyramid") for highaltitude meteorological studies since 1989. Climate conditions were registered by specific monitoring stations at certain times (2002-2008); during preliminary stage, these values were considered representative of the local context chosen for the project, that is Namche Bazar, a village located within the park, in a central point both from the logistic and altimetric/weather points of view. For the residential unit under investigation, two different constructive approaches were selected and compared: earthbags and straw bales. Both techniques have several advantages, in particular availability of raw material (jute bags, soil, straw), simplicity (e.g. earthbag constructions are realized using the ancient technique of pisé, combined with flexible bags or tubes), durability, insulation performance, costeffectiveness. Through a specific software for calculation of winter/summer thermal loads, different combinations of selections of structure and insulation were examined for both solutions, in order to achieve the optimum for the case study. Furthermore on the base of data monitored on site, a specific assessment was carried out to evaluate the potential of solar and wind resources. Aiming at entirely covering the heat and electric energy needs by exploiting renewable energy sources, various plant configurations were finally assumed. Every single choice was made to reduce human influence on land resources, such as timber, and to improve internal and external environmental quality
