This study proposes a control scheme for high power grid-connected wind power converters, which is oriented to enhance their performance when connected to weak grids with low short circuit ratio. The proposed controller consists of an outer current reference generation loop and an inner current loop, working in stationary reference frame. In the outer loop, the current reference is calculated to comply simultaneously with the grid code requirements, the control of the DC link, and the operational safety margins of the converter during faulty conditions. On the other hand, the proposed inner current loop consists of a proportional resonant controller, a capacitor voltage feedforward and a phase shifter. Moreover, simulation results considering different weak grid conditions, as well as experimental results of a full-scale 4 MW converter test-bench are presented to validate the good performance of the proposed method.This work has been partially suported by the Spanish Ministry of Science and Universities under the code RTI2018-100921-B-C21 and Tecniospring programme under the code TECSPR16-1-006.Peer ReviewedPostprint (published version
