Electrophoretic co-deposition of Mn1.5Co1.5O4, Fe2O3 and CuO: Unravelling the effect of simultaneous addition of Cu and Fe on the microstructural, thermo-mechanical and corrosion properties of in-situ modified spinel coatings for solid oxide cell interconnects
A systematic microstructural, thermo-mechanical and electrical characterization of simultaneous Fe–Cu doped Mn–Co spinel coatings processed by electrophoretic co-deposition on Crofer 22 APU is here reported and discussed. An innovative approach for the simultaneous electrophoretic deposition of three spinel precursors is designed, conceived and optimised, with the aim of outlining time- and energy-saving spinel modification routes. The effect of different levels of Cu and Fe co-doping is observed on the stability of the modified Mn–Co spinel phase, the coefficient of thermal expansion (CTE), the corrosion resistance and on the densification behaviour of the obtained coatings. Cu determines an increase of CTE, while Fe has the opposite behavior. The synergic effect of the simultaneous Fe and Cu co-doping results in an improved densification and the stabilization of the MnCo2O4 cubic phase. The most interesting results in terms of corrosion resistance are obtained for the Mn1.28Co1.28Fe0.15Cu0.29O4 spinel