Abasaeed, Ahmed E.

Al-Fatesh, Ahmed S.

Albaqi, Fahad

Alkhalifa, Abdulmajeed

Arasheed, Rasheed

Bagabas, Abdulaziz A.

Fakeeha, Anis H.

Frusteri, Francesco

Ibrahim, Ahmed A.

Kasim, Samsudeen O.

Khan, Wasim U.

Kumar, Nadavala Siva

Kumar, Rawesh

Lanre, Mahmud S.

Osman, Ahmed I.

Syngas production via dry reforming of methane was conducted over 5 wt%Ni + xWO3/γ-Al2O3 (x = 1, 3, 5, 7, or 9 wt%) catalysts at 700 °C and ambient pressure for 7.5 h in a tubular fixed-bed reactor. Textural, morphological, and catalytic properties were investigated in relation to the weight percent of tungsten trioxide loading. The physicochemical properties of the catalysts were evaluated using XRD, N2-physisorption, TGA, H2-TPR, CO2-TPD, NH3-TPD, SEM, EDX, and Raman techniques. N2-physisorption analysis showed that tungsten trioxide promoter had a minor impact on the textural properties upon varying its weight percentage loading. With increasing tungsten trioxide loading, the total amount of reducible NiO-interacting species was increased over the catalyst surface. 5Ni+5WO3/γ-Al2O3 catalyst showed stable 79% CH4 conversions and 83% CO2 conversion with the lowest carbon deposition due to the presence of stable metallic Ni species (derived from reducible NiAl2O4 and NiWOAl), the highly acidic sites, and moderate basic sites.<br/

Queen's University Belfast Research Portal

Syngas production from methane dry reforming via optimization of tungsten trioxide-promoted mesoporous γ-alumina supported nickel catalyst

Syngas production from methane dry reforming via optimization of tungsten trioxide-promoted mesoporous γ-alumina supported nickel catalyst

Abstract

Similar works

Full text

Available Versions

Queen's University Belfast Research Portal