In the development of modern Cyber-Physical Systems, Model-Based Testingof the closed-loop system is an approach for finding potential faults andincreasing quality of developed products. Testing is done on many differentabstraction levels, and for large-scale industrial systems, there are severalchallenges. Executing tests on the systems can be time-consuming and largenumbers of complex specifications need to be thoroughly tested, while manyof the popular academic benchmarks do not necessarily reflect on this complexity.This thesis proposes new methods for analyzing and generating test casesas a means for being more certain that proper testing has been performed onthe system under test. For analysis, the proposed approach can automaticallyfind out how much of the physical parts of the system that the test suite hasexecuted.For test case generation, an approach to find errors is optimization-basedfalsification. This thesis attempts to close the gap between academia and industryby applying falsification techniques to real-world models from VolvoCar Corporation and adapting the falsification procedure where it has shortcomingsfor certain classes of systems. Specifically, the main contributionsof this thesis are (i) a method for automatically transforming a signal-basedspecification into a formal specification allowing an optimization-based falsificationapproach, (ii) a new collection of specifications inspired by large-scalespecifications from industry, (iii) an algorithm to perform optimization-basedfalsification for such a large set of specifications, and (iv) a new type of coveragecriterion for Cyber-Physical Systems that can help to assess when testingcan be concluded.The proposed methods have been evaluated for both academic benchmarkexamples and real-world industrial models. One of the main conclusions isthat the proposed additions and changes to the analysis and generation oftests can be useful, given that one has enough information about the systemunder test. The methods presented in this thesis have been applied to realworldmodels in a way that allows for higher-quality products by finding morefaults in early phases of development
