Kobalava, H. Efficiency analysis of the aerothermopressor application for intercooling between compressor stages by using CFD model / H. Kobalava, M. Radchenko, D. Konovalov // Journal of New Technologies in Environmental Science. – 2021. – No. 4, vol. 5. – P. 129–134.A study of the aerothermopressor operation for air intercooling between the stages of a multistage compressor as part of a modern gas turbine (LMS100 brand from General Electric) was carried out in the article. A calculation method has been developed using numerical modeling for the evaporation of fine water droplets in the air flow. The main characteristics of the two-phase flow at the aerothermopressor outlet have been determined. It has been found that jet apparatus provides efficient atomization of the liquid, and hence, more efficient isothermal compression process in a high-pressure compressor. The aerothermopressor applying allowed to reduce the temperature of the compressed air between the compressor stages to 50-70°C. Such a decrease in temperature under the thermo-gas-dynamic compression conditions allowed to increase the pressure at the aerothermopressor outlet up to 12-28 kPa (4-9%)
