Investigation of the mechanical properties and corrosion behaviour of hybrid L 80 Type 1 and duplex steel joints produced by magnetically impelled arc butt welding

Abstract

In the field of deep geothermal energy, the mono-tube design will be increasingly used in the future, as significant cost savings can be expected in the production of boreholes up to depths of 6000 m. The previously used bolting of the pipe lengths by means of sleeves contributes significantly to the construction costs. In addition, there is an increased risk of failure for the sleeve bolting, especially if different materials have to be used in different layers for the purpose of increasing the corrosion resistance. Magnetically Impelled Arc Butt Welding (MIAB) was used for direct welding of pipe segments with complete elimination of socket bolting. In the process, the casing material (L80 Type 1), which is a cost-effective standard material, and a corrosion-resistant duplex steel (1.4462) were hybrid welded. The results show excellent properties both in terms of mechanical properties and corrosion resistance. It is shown that the advantages of the MIAB process in joining these different materials can successfully overcome the metallurgical challenges. This new approach for the production of borehole liners can contribute significantly to cost reduction in the construction of geothermal boreholes

    Similar works