'Institute of Electrical and Electronics Engineers (IEEE)'
Doi
Abstract
Photovoltaic (PV) conversion systems are in continuous development due to their increasingly competitive prices. The traditional configuration of large-scale PV plants is based on high-power central inverters, which have reduced their cost by increasing their power rating. However, this cost reduction is expected to saturate in the near future, mainly due to an increase in the cost of the dc wiring. Cascaded conversion systems have appeared as potential solutions to continue reducing the PV plant cost. They consist of several conversion units whose ac outputs are connected in series. This enables the power-rating reduction of each individual conversion unit, while maintaining the power rating of the conversion structure. Thus, the conversion units are placed closer to the PV panels, reducing the dc wiring cost. In this paper, a novel three-phase topology for medium-voltage cascaded conversion systems is presented. The proposed topology is formed of several conversion units, each one with a reduced number of conversion stages, namely, dc/ac, medium-frequency isolation and ac/ac. Moreover, thanks to its sequential operation and modulation technique, zero-voltage switching and zero-current switching are achieved in all conversion stages. In this way, with respect to the configuration with central inverters, the proposed topology has the advantages of cascaded conversion systems. In comparison to previously investigated cascaded topologies, the proposed topology also presents promising characteristics, representing a potential cost reduction and efficiency increase. An experimental validation of the topology is carried out in a laboratory prototype consisting of three conversion units.This work was supported in part by the Spanish State Research Agency (AEI) under Grant PID2019-110956RB-I00 /AEI/10.13039/501100011033, and in part by the Public University of Navarre through a Ph.D. Scholarship
