This paper presents the experimental investigation of the self-healing capacity and ability to maintain the structural performance of a Ultra High-Performance (Fiber Reinforced) Concrete (UHPC/UHPFRC), with a crystalline admixture to stimulate the healing, after freeze-thaw cycles. To the aforesaid purpose ultrasonic pulse velocity tests, four-point flexural tests (before and after freeze-thaw, and after self-healing), and crack closure quantification have been performed. 20 mm thin beams were pre-cracked up to a cumulative crack width of 0.3 mm by means of four-point flexural test and subjected to freeze and thaw cycles between -20° C to 38° C for 17 days, each cycle lasting for 20 hrs. The flexural tests showed that freeze-thaw did not deteriorate the specimens' flexural strength. However, freeze-thaw caused some damage which was noticeable in the ultrasonic test. After the freeze and thaw cycles specimens were immersed in water for self-healing. The self-healing progress was measured periodically after 1, 2, 3, and 6 months of healing through ultrasonic test and microscopy image processing. The results showed that the freeze-thaw damages were healed throughout the specimens, and that previously undergone damage didn't affect neither the stimulated autogenous healing capacity of the investigated material nor its mechanical performance. This can be likely attributed to both closure of the cracks, which were almost fully healed within 3 months, and likely also to improved bond strength between the fibers and concrete matrix, due to the deposition of the healing products along the interface