To effectively monitor the vibration of blades in a rotating machine, a non-contacting
method called blade tip-timing (BTT) has been used. The method is based on the analysis of the
differential arrival times of the blades at sensors mounted on the stator to characterize the
vibration amplitude and frequency of the blades. These sensors can also provide blade
tip clearance measurement. A combination of these data can provide a robust condition monitoring
approach for the early detection of blade cracks.
Eddy current sensors (ECS) have shown great potential to assess the health of an engine without any
need for direct access to the blade and therefore they are insensitive to the presence of any type
of contaminant. Also, both tip timing and tip clearance of each blade could be measured by these
sensors in real time and at high resolution.
ECSs measure the magnetic field caused by eddy currents during the blade motion, and hence are a
coupled mechanical and electromagnetic problem. An ECS on the casing of a machine has been modeled
to fully understand how the dynamic response of the blade is measured by the sensors. Detailed 2-D
and 3-D modeling and simulation of a rotating simplified bladed disk passing an ECS is presented.
The effect of the variation of the rotation speed and the gap between the sensor and the blade tip
on the accuracy of the measurement is investigated. Such an analysis will enable the reliable
monitoring of blade damage during engine operation