some wise individual once aforementioned that system could be a system wherever we will finish off the machine whenever we'd like. That’s the distinction between controlled and uncontrolled system. Our project is regarding create this system economical and dynamic. Because the name instructed the automated management is for dominant the motor from remote place, look over its operational conditions; get feedback from the motor itself. Our target is to manage the motor from distant place by mobile DTMF tone and conjointly get feedback by SMS whereas it's in ON or OFF condition. We tend to conjointly make sure the safe operation of the motor by police investigation the voltage of the supply and guarantee feedback from system whereas it's over or below voltage. Once more we tend to conjointly get these feedbacks by SMS additionally. GSM network is all over in our country that’s why we decide GSM network to control our motor conjointly transferring feedback data through it. We tend to conjointly use GSM network as a result of if we tend to use it then we tend to don’t have to be compelled to establish further instrumentation for networking. To transmit feedback signals we tend to use GSM electronic equipment at the motor finish conjointly generate management signal by mobile DTMF as a result of it's terribly simple to get DTMF by mobile station and send feedback SMS by electronic equipment additionally. In industrial sector we tend to hope our project is become handy and value effective to control motor and provides its protection
