Somethings About Biological Prostheses

Abstract

Finite element models of the female biofidel were developed using a specific combination of segmentation with computed tomography and solid modeling tools capable of representing bone physiology and structural behavior. This biofidel finite element (FEM) model is used to evaluate the change in the physiological distribution of stress in the femoral prosthesis and to evaluate the new design criteria for biopsy. Biomimetics, biomechanics, and tissue engineering are three multidisciplinary fields that have been considered in this research to achieve the goal of improving the reliability of prosthetic implants. The authors took these studies to gather the untapped potential of such advanced materials and design technologies by developing finite models of Biofidel elements capable of correctly mimicking the biomechanical behavior of the femur. The new remodeling of the tetrahedral elements was performed in 3Matic looking for the congruence of the node at the bone-implant interfaces, where the material was defined for the new configuration of the finite elements. The evaluation of the mechanical properties was made taking into account the mechanical characteristics of the cortical and trabecular bone. For biomechanical integration of the implant, a custom material with an improved combination of strength and rigidity that matches the bone should be used. This greater biomechanical compatibility will avoid weakening the implant and increase lifespan, avoiding additional surgery for revision and allowing good biological integration (bone growth). Innovative biomimetic materials for tissue engineering based on hydrophilic polymers were developed by our research group and presented attractive physical, biological, and mechanical properties for biomedical applications. For use with metal prostheses, the authors have developed a hybrid biocompatible material, extremely biocompatible, based on hydrophilic chemicals and hydroxy-ethyl-methacrylate type. The structural metal composition of the new prostheses will be made of titanium alloys using additive technology based on melting thin layers of titanium powder (about 50 microns) on each other until the desired component is obtained (sandwich method). Then, the biomaterial and osteoconductive nanostructured material developed in our previous studies can cover the titanium structural prosthetic skeleton. These hybrid biological prostheses, which are made using synthetic materials capable of inducing the growth of biological networks and structural steel scaffolding, may favor the emergence of new classes of orthopedic hybrids in the medical field. The new hybrid bio-prosthesis could drastically reduce protection against stress while providing an advantageous improvement in the life of the prosthesis compared to traditional solutions. Recovering optimal joint functionality will improve the patient's quality of life, which perceives a significant reduction in the risk of the new surgery. The requirement to predict potential structural changes that could be induced by improper use of biologically compatible prostheses in bone structure and morphology has forced our studies to evaluate fictitious models that could be considered for efficient bone distribution and orthotropic behavior