Belete, Kiflom

Rüther, Nils

Spiller, Stephan Mark

Strellis, Brandon

English

Hydraulic Engineering Repository

Conference Paper, Published VersionSpiller, Stephan Mark; Rüther, Nils; Belete, Kiflom; Strellis, BrandonAssessing environmental effects of hydropower peaking by3D numerical modelingDresdner Wasserbauliche MitteilungenZur Verfügung gestellt in Kooperation mit/Provided in Cooperation with:Technische Universität Dresden, Institut für Wasserbau und technischeHydromechanikVerfügbar unter/Available at: https://hdl.handle.net/20.500.11970/103593Vorgeschlagene Zitierweise/Suggested citation:Spiller, Stephan Mark; Rüther, Nils; Belete, Kiflom; Strellis, Brandon (2011): Assessingenvironmental effects of hydropower peaking by 3D numerical modeling. In: TechnischeUniversität Dresden, Institut für Wasserbau und technische Hydromechanik (Hg.):Wasserkraft mehr Wirkungsgrad + mehr Ökologie = mehr Zukunft. Dresdner WasserbaulicheMitteilungen 45. Dresden: Technische Universität Dresden, Institut für Wasserbau undtechnische Hydromechanik. S. 79-86.Standardnutzungsbedingungen/Terms of Use:Die Dokumente in HENRY stehen unter der Creative Commons Lizenz CC BY 4.0, sofern keine abweichendenNutzungsbedingungen getroffen wurden. Damit ist sowohl die kommerzielle Nutzung als auch das Teilen, dieWeiterbearbeitung und Speicherung erlaubt. Das Verwenden und das Bearbeiten stehen unter der Bedingung derNamensnennung. Im Einzelfall kann eine restriktivere Lizenz gelten; dann gelten abweichend von den obigenNutzungsbedingungen die in der dort genannten Lizenz gewährten Nutzungsrechte.Documents in HENRY are made available under the Creative Commons License CC BY 4.0, if no other license isapplicable. Under CC BY 4.0 commercial use and sharing, remixing, transforming, and building upon the materialof the work is permitted. In some cases a different, more restrictive license may apply; if applicable the terms ofthe restrictive license will be binding.34. Dresdner Wasserbaukolloquium 2011: Wasserkraft – mehr Wirkungsgrad + mehr Ökologie = mehr Zukunft Dresdner Wasserbauliche Mitteilungen 79  Block  B3 Assessing environmental effects of hydropower peaking by 3D numerical modeling Stephan Mark Spiller, Nils Rüther, Kiflom Belete, Brandon Strellis  The aim of the present study is to evaluate whether 3D numerical modeling is suitable to predict frequent load fluctuations in natural rivers according to different hydro power operation schemes. The study is carried out in the framework of the Center of Environmental Design of Renewable Energies (CEDREN). The objective of the centre is to develop and disseminate effective design solutions for renewable energy production that take adequate account of environmental and societal issues, both locally and globally. The focus of the present study is on the simulation of highly unsteady flow, including strongly varying water levels in a natural river reach of approximately 1.2 km length and 75 m width. The flow in the river reach is highly complex, since it includes river bends as well as large pool / riffle sequences. The model will be verified by measurements of 3D velocities and water levels. In the future, these results will be used to investigate morphodynamic changes and risk for potential fish stranding areas.   Das Ziel der vorliegenden Studie ist es ein dreidimensionales, numerisches Programm auf einen Flussabschnitt mit lokal und zeitlich starken Wasserspiegellagenschwankungen anzuwenden und zu beurteilen ob dieses numerische Programm in der Lage ist die richtigen Wasserspeiegellagen vorherzusagen. Die Studie ist im Rahmen des Center of Environmental Design of Renewable Energy (CEDREN) durchgeführt. Das Ziel des Forschungsprojektes ist die Entwicklung und Verbreitung wirksamer Lösungen für erneuerbare Energien, welche ökologische und gesellschaftliche Problematiken in Betracht ziehen. Der Fokus der vorliegenden Studie beruht auf der Simulation von stark instationären Abflüssen einschließlich stark schwankender Wasserstände in einem natürlichen Flussabschnitt von ca. 1.2 km Länge und 75 m Breite. Die Strömung in diesem Flussabschnitt ist aufgrund von Flussschleifen und ausgeprägten Pool / riffle Sequenzen sehr komplex. Die Simulationsergebnisse werden mit gemessenen Wasserständen verglichen. In Zukunft werden die Resultate dieser Studie genutzt um Untersuchungen in den Bereichen morphodynamischer Veränderungen sowie Risiken möglicher Fisch Strandung durchzuführen. 80 Assessing environmental effects of hydropower peaking by 3D numerical modeling   1 Introduction In the near future the production of electricity through hydropower peaking will increase dramatically. Especially Norway, where geographical situation and easy availability of the natural resource water favor hydropower peaking, will experience changes in electric power production schemes. When meeting peak load requirements, a power station is turned on at a particular time during the day. It generates power at a constant load for a certain number of hours and is then turned off or set to a different load for another time period, resulting in a high variability of flow discharges. Where reservoir hydro schemes are operated primarily to provide peak load services, particular environmental risks should be considered in any environmental impact assessment. At a minimum, focus should be on water quality, fluvial geomorphology, riparian vegetation, macro invertebrate, and fish communities underpinned by a sound hydrological analysis.  The most important issues are fast and frequent water level changes when stopping or starting production. From a morphological point of view this may result in an increased seepage-induced erosion of riverbanks as well as in special sorting processes of bed substrate, resulting in reduced hydraulic conductivity as well as clogging processes due to sedimentation of fines. From an ecological point of view this may have an impact on macro invertebrate and fish communities exposing them to flash floods and an increased stranding risk. The motivation for the study was therefore to apply a 3D numerical code to a natural river reach in order to evaluate whether the program is usable to predict harm to the environment. Using CFD in hydraulic engineering applied to natural rivers has a young history. Rüther et al (2010) gives a short overview of CFD models applied to natural streams. Baranyi & Józsa (2006) modeled the flow characteristics of a 4 km long reach of the river Danube with a CFD code called SSIIM (Olsen 2010) and concluded that measured velocities and turbulent kinetic energy are well reproduced by the model. Abad et al (2008) modeled the complex flow in a bend with 5 subsequent, submerged weirs over the total length of approximately 200 m and 20 m width with the commercial CFD code Flow3D 9.0 (Flow Science, Inc., Santa Fe, N.M.). They concluded that the CFD model reproduced the general pattern of the flow through the reach, including the recirculation zones in the vicinity of the weirs. All the before mentioned studies used the Reynolds-averaged Navier-Stokes equations and the standard k-Epsilon turbulence closure. The simulations were carried out for a steady state discharge. In all the cases, the flow is not subject of a flow change from subcritical to super critical.  34. Dresdner Wasserbaukolloquium 2011: Wasserkraft – mehr Wirkungsgrad + mehr Ökologie = mehr Zukunft Dresdner Wasserbauliche Mitteilungen 81  Block  B3 Therefore, the present study aims to use a commercial CFD code to simulate highly unsteady flow with strongly varying discharge and consequent strongly varying water levels in a river reach with alternating pool and rapid sequences. The commercial code is called Star CCM+ (CD-adapco, Melville, NY, USA) and is introduced in chapter 3. The experimental field site is introduced in chapter 2. Chapter 4 describes the results and chapter 5 sums up the main conclusions and gives an outlook to further research.  2 Field Site The River Nidelva has its catchment in mid Norway, south-east of Trondheim. The Nidelva watercourse has its source near Sylan in Sweden and flows west wards out to sea in Trondheim. The distance from the source to the sea is 160 km and the catchment area of the watercourse is 3100 km2Right after the upstream pool, the water heads for a rapid and changes from sub to supercritical flow. As it can be seen in the aerial photo in figure 1, this section is characterized by strong surface waves and local hydraulic jumps. The rapid continues throughout the subsequent bend and leads to a pool which ends in the models downstream boundary condition. The bed elevation difference between the end of the upstream pool and the beginning of the downstream one, is approximately 3.0 m . The river Nidelva is characterized by several hydro power plants and is therefore highly regulated. The investigated study reach, shown in figure 1, is approximately 1200 m long and is located 5 km south of Trondheim. Located at the upstream boundary of the study reach, is the outlet of the last hydropower plant before river Nidelva flows into the Trondheim fjord. Downstream of the power plant, the river is characterized by sequences of large bended pools and rapids as it is depicted in figure 1. The data to establish the digital elevation model and the grid for the numerical simulation was gained form digital maps with detailed elevation lines as well as bathymetry measurements. The bathymetry measurements were taken by boat, kayak and wading. The measurements taken by boat and kayak are based on a single beam echo sounder measurement coupled with a differential global positioning system (D-GPS). The measurements taken by wading are based on D-GPS only. An upstream cross section was subject of Acoustic Doppler Current Profiler (ADCP) measurement.  86 Assessing environmental effects of hydropower peaking by 3D numerical modeling   The goal of this study was to identify a CFD model which is capable of simulating flow changes in natural rivers with highly unsteady flow rates. Further studies will use an improved digital elevation model along the rapids and will use measurements of averaged cross sectional velocities and shear stress estimations to verify the numerical model. In addition, the model will be applied to cases of extreme discharge increase in order to study additional forces on the river bed. Finally, the model range will be extended to areas further downstream where existing data of stranding areas is available.  References Abad, J. D. Rhoads, B. L. et al.: Flow structure of different stages in a meander-bend with bendway weirs. In: Journal of Hydraulic Engineering 134(8), (2008), 1052-1063. Baranya, S. Józsa, J.: Flow analysis in river Danube by field measurement and 3D CFD turbulence modelling. In: Periodica Polytechnica: Civil Engineering 50(1), (2006), 57-68. CD-adapco: User Guide Star-CCM+ Version 5.06.007, (2010). Rüther, N. Jacobsen, J. Olsen, N. R. B. Vatne, G.: Prediction of the three-dimensional flow field and bed shear stresses in a regulated river in mid-Norway. In: Hydrology Research 41(2), (2010), 145-152.  Olsen, N.R.B.: SSIIM manual, http://folk.ntnu.no/nilsol/ssiim/manual3.pdf (2010)    Authors: Stephan Mark Spiller, M.Sc.,   Brandon Strellis Dr. Nils Rüther (PhD),     Mason Building Dr.-Ing Kiflom Belete    790 Atlantic Drive NTNU, Norway,      Atlanta, S.P. Andersens veg 5,    GA 30332-0355 P N-7491 Trondheim,    Tel.: +47 - 735 92409    stephan.spiller@ntnu.no   

Assessing environmental effects of hydropower peaking by 3D numerical modeling

http://henry.baw.de/bitstream/20.500.11970/103593/1/SpillerAssessing%20environmental%20effects%20of%20hydropowerf.pdf

Assessing environmental effects of hydropower peaking by 3D numerical modeling

Abstract

Similar works

Full text

Available Versions

Hydraulic Engineering Repository