V podjetju, v katerem je bilo opravljeno magistrsko delo, je pomembno področje posamična in maloserijska proizvodnja puhal, ki so gnana z elektronsko komutiranimi elektromotorji. Tehnološka priprava in prilagoditev proizvodnje na novo družino izdelkov zahteva pripravo in prilagoditev delovnih mest tako, da vpeljane spremembe ne bodo ovirale proizvodnje obstoječih izdelkov. Magistrsko delo obravnava v prvem delu teorijo o delovanju elektronsko komutiranih elektromotorjev. V nadaljevanju je poglobljeno obravnavan montažni proces in lastnosti različnih tipov proizvodnje, tudi v luči industrije 4.0. V naslednjem poglavju je podana metodologija dela s poudarkom na strukturi izdelka in montažnega procesa ter analizirane možnosti izboljšav montažnih in strežnih operacij po delovnih mestih. Osrednji del naloge podaja natančen opis vseh delovnih mest, izvedenih posodobitev, odkritih problemov in analizo končne kontrole izdelka. Rezultat magistrskega dela je optimiran montažni proces puhala z vsemi delovnimi mesti in delovnimi operacijami ter izdelano puhalo, vključno s prikazom ter diskusijo rezultatov končne kontrole.In the company where the master\u27s work was done, an important area is the individual and small-scale production of blowers driven by electronically commutated electric motors. Technical preparation and adaptation of production for a new product family requires the preparation and adaptation of work stations so that the changes introduced will not hinder the production of existing products. The master\u27s thesis begins with a theory of the working principle of electronically commutated electric motors. Next part describes the assembly process and the characteristics of various types of production, including in light of industry 4.0. The following section describes a work methodology with an emphasis on product structure and assembly process and analyzes the possibilities for improving assembly and server operations across work stations. The central part of the assignment provides a detailed description of all working stations, updates performed, problems detected, and analysis of final product inspection. The result of the master\u27s thesis is an optimized blower assembly process with all working stations, operations and a manufactured blower, including the illustration and discussion of final inspection results
