We describe a user study comparing 3D Modeling with Silhouettes and Google SketchUp. In the user study, ten users were asked to create 3D models of three different objects, using either 3D Modeling with Silhouettes or Google SketchUp. Ten different users were then asked to rank images of the models produced by the first group. We show that the models made with 3D Modeling with Silhouettes were ranked significantly higher on average than those made with Google SketchUp

Durand, Fredo

Igarashi, Takeo

Rivers, Alec

DSpace@MIT

Computer Science and Artificial Intelligence LaboratoryTechnical Reportm a s s a c h u s e t t s  i n s t i t u t e  o f  t e c h n o l o g y,  c a m b r i d g e ,  m a  0 213 9  u s a  —  w w w. c s a i l . m i t . e d uMIT-CSAIL-TR-2010-023 May 5, 2010A User Study Comparing 3D Modeling with Silhouettes and Google SketchUpAlec Rivers, Fredo Durand, and Takeo IgarashiA User Study Comparing 3D Modeling with Silhouettes andGoogle SketchUpAlec RiversMIT CSAILFre´do DurandMIT CSAILTakeo IgarashiThe University of TokyoOddleg caliper Slide Press boxSilhouettesSketchUpFigure 1: Middle-ranked models: We performed a user study in which users were asked to model three objects usingeither 3D Modeling with Silhouettes or Google SketchUp. A separate group of users then ranked the models producedby the first group. Here we show for each object the middle-ranked model done using silhouettes and done usingSketchUp.1 IntroductionWe recently introduced 3D Modeling with Silhouettes [1], a new sketch-based modeling approach in which models areinteractively designed by drawing their 2D silhouettes from different views. The core idea behind our approach is tolimit the input to 2D silhouettes, removing the need to explicitly create or position 3D elements. Arbitrarily complexmodels can be constructed by assembling them out of parts defined by their silhouettes, which can be combined usingCSG operations.In this technical report, we describe a user study comparing 3D Modeling with Silhouettes and Google SkechUp [2].We chose to compare to SketchUp as it is also intended for novice users, and also aimed at the creation of man-madeobjects.1Oddleg caliper Slide Press boxRankReviewer a b c d e f g h i j a b c d e f g h i j a b c d e f g h i jTable 1: User study results: Each column is the ranking of a different reviewer (a – j) of the models done by theuser study participants, with the best models at the top. Green boxes indicate models designed with our approach; redboxes are models designed with SketchUp. The numbers inside the boxes are the number of the user who created themodel.2 MethodologyOur user study involved ten participants, recruited from the general population, all of whom were familiar with comput-ers but none of whom had previous experience doing 3D modeling. Each participant spent twenty minutes followinga tutorial of our modeler, and twenty minutes following a tutorial provided by Google for SketchUp1, in randomizedorder. The participant was then shown a series of three photographs of objects: an oddleg caliper, a slide, and a pressbox, shown in Figure 2. These objects were taken from a random list of man-made objects generated as part of theevaluation in [1]. We tried to select objects from that list that had a range of scales, with each being complex enoughto produce interesting results. The participant then modeled each of these objects in sequence, spending a maximumof 25 minutes on each. Each object was modeled only once, with each user alternating between using our modeler andSketchUp (each participant therefore created a total of three models). Half the participants started with SketchUp, andhalf with our modeler.In the second phase of our user study, ten people who had not participated in the first phase were asked to sort renderedimages of every model created into a total ordering by quality. The rendered images were produced in a third-partycommercial renderer and could not be distinguished as to which modeler was used to create them. We call these usersreviewers.3 ResultsThe models created by the user study participants in the first phase are shown in Table 2, and the rankings done inthe second phase are shown in Table 1. We show the middle-ranked model done with our approach and done withSketchUp for each object in Figure 1.We believe that the rankings in Table 1 illustrate that models done with our modeler were consistently ranked higherthan models done with SketchUp. By ANOVA analysis, the effect of the modeler on the model’s ranking was statisti-cally significant with higher than 99% confidence. To quantify the extent of this preference, we calculated that of allthe pairs of a model done with our modeler and a model done with SketchUp, reviewers on average ranked the modeldone with our modeler higher 83% of the time.However, a direct comparison of the ranks of the models made with our approach and those made with SketchUp canbe misleading, as highly-skilled users’ models tend to outrank less skilled users’ models, regardless of the modeler1“Start a Drawing” self-paced tutorial parts 1, 2 & 3, available at http://sketchup.google.com/3dwarehouse/2used. (See, e.g., user 9 in the rankings, who did well enough with SketchUp to outrank other users’ models done withour approach, but did even better when using our approach.) It is more appropriate to analyze how each modeler faredwhen using our approach compared with when using SketchUp. We therefore calculated for each user the average rankof the user’s models done with our modeler and the average rank of the user’s models done with SketchUp. We foundthat every single user had a higher average rank for their models done with our approach, on average 3.19 places higherthan the average for their models done with SketchUp. By ANOVA analysis, this result is statistically significant withover 99% confidence.4 DiscussionIn this section we will discuss some of the differences between these two modeling approaches that could account forthe difference in quality of the models produced in our user study.One difference has to do with the nature of the lowest-level building blocks of a model. In SketchUp, the most basicelements of a model are edges and surfaces, and 3D volumes exist only as boundary representations constructed outof edges and surfaces. By comparison, the lowest-level building block of a model in our approach is a 3D volume,specified by the intersection of 2D silhouettes. We found that working with volumes and silhouettes bypassed a varietyof difficulties that novice users had when working with a boundary representation: for example, in SketchUp, usershad to manually ensure the coplanarity of lines when generating a surface, be aware of and avoid T-junctions, ensurewatertightness, and so on.Another difference is with the interface that each modeling program presents: SketchUp uses a single 3D view, whileour approach uses three 2D views. We found that users were more immediately comfortable with a single 3D viewof the object. However, we also found that having a single view caused certain difficulties: because 2D sketchingoperations in a single view are ambiguous with regards to depth, users often made the mistake of performing a modelingoperation that appeared reasonable in one view, only to rotate to another view and find that the actual shape was greatlydistorted. In our interface, by comparison, all shapes are drawn in at least two views, preventing this type of ambiguity.We also observed that users sometimes had difficulty envisioning what steps were necessary to achieve a desired shapein SketchUp. This was because in SketchUp there are usually multiple ways to achieve a shape, some being easy andothers hard. In our study, users would often try one approach, only to have to delete the shape they had built and tryagain with a different approach. In our interface, by comparison, there is intended to be only one way to achieve anyshape, and this pattern of deleting and trying again generally did not occur.Our user study could have been improved by having an even number of models, so that each user could do an equalnumber of models with SketchUp and our approach. We limited the study to three models simply due to time con-cerns, as even with just three models the user study took roughly 2 12 hours per user. As a result, the overall statisticson rankings of models done with our approach versus those done with SketchUp could be affected by the skills ofindividual users if, for example, more skilled users were randomly selected to make two models with our approach.However, the comparison of each individual user’s scores with each modeler is still valid, and shows that individualsalways performed better with our approach.References[1] Alec Rivers, Fredo Durand, and Takeo Igarashi. 3D Modeling with Silhouettes. ACM Transactions on Graphics(Proc. SIGGRAPH), 29(3), 2010.[2] SketchUp. Google. 2009.3(a) Oddleg caliper (b) Slide (c) Press boxFigure 2: The photos shown to user study participants.Our modeler SketchUp Our modeler01234SketchUp Our modeler SketchUp56789Table 2: User study models: The set of all models generated by our ten users. Note that five users started with ourmodeler, while the other five started with SketchUp.4

A User Study Comparing 3D Modeling with Silhouettes and Google SketchUp

http://dspace.mit.edu/bitstream/1721.1/54731/1/MIT-CSAIL-TR-2010-023.pdf

A User Study Comparing 3D Modeling with Silhouettes and Google SketchUp

Abstract

Similar works

Full text

Available Versions

DSpace@MIT