A Olmedo

A Rubben

A. R. Akisanya

B. Dyer

BL Agarwal

British Standards Institution

C. Wilkinson

CT McCarthey

DW Oplinger

E Madenci

EF Godwin

EW Godwin

FE Devine

GD Bella

GJ Hancock

GM Pearce

GR Pyner

H Estrada

HG Kia

I. Guz

J Rhodes

JA Bailie

JH Oh

JH Stoekdale

JR Eissenman

KF Chung

LJ Hart-Smith

M Durante

M. Kashtalyan

S Sundaram

S. M. Radhakrishnan

SV Hoa

WW Yu

Applied Composite Materials

English

The performance of flanged panel bolted joints used in Glass Reinforced Plastic (GRP) sectional tanks is investigated using a combination of experimental and computational methods. A four-panel bolted assembly is subjected to varying pressure in a rupture test rig to study damage development at the intersection of the four panels. It is found that cracking initiates at a panel corner at the four panel intersection at a pressure of 35 kPa and propagates to other panel corners with increasing pressure. This is attributed to the excessive deformation at the four panel intersection. The effect of bolt spacing, varying end distances and bolt pre-tension in decreasing the localized deformation and maximum induced stresses are investigated using finite element analysis. It is found that varying the amount of bolt spacing and end distances had a considerable influence on the joint performance whereas varying bolt pretension had very negligible effect. Consequently, this study establishes the maximum pressure which the GRP panel joint can withstand without failure and the corresponding optimum joint parameters.</p

Radhakrishnan, S. M.

Dyer, B.

Kashtalyan, M.

Akisanya, A. R.

Guz, I.

Wilkinson, C.

Heriot Watt Pure