DEVELOPMENT AND VALIDATION OF A STABILITY INDICATING HPLC METHOD FOR THE DETERMINATION OF NILOTINIB HYDROCHLORIDE IN BULK AND PHARMACEUTICAL DOSAGE FORM
Objective: To develop a rapid, accurate, linear, sensitive and stability indicating RP-HPLC method for the determination of nilotinib in bulk and pharmaceutical dosage forms in the presence of its four related substances.Methods: The RP-HPLC method was developed for the chromatographic separation of nilotinib and its impurities by using waters Xterra RP-18 (150*4.6 mm, 3.5 µm) column with a mobile phase combination of 10 mM ammonium formate with pH-3.5 and acetonitrile in gradient mode. An injection volume of 20 µl. Flow rate was 1.0 ml/min and detection was carried a wavelength of 250 nm. The method was validated as per ICH guidelines.Results: The retention time for nilotinib and its four impurities were found to be 4.37, 7.40, 8.96, 10.21 and 10.87 min respectively. The linear regression analysis data for the calibration plots showed the good linear relationship in the concentration range of 0.04-3.0 ppm for the nilotinib impurities. The % recovery of nilotinib impurities was found to be 96.8-99.4% in the linearity range. The detection limit (LOD) values were about 0.014, 0.016, 0.005 and 0.03 ppm respectively and the quantification limit (LOQ) values were 0.042, 0.048, 0.014 and 0.09 ppm respectively. The % degradation at various stress conditions like acid, alkaline, oxidative, thermal and photolytic stress was found to be 8.92, 18.35,5.63, 0.88 and 3.89 respectively.Conclusion: The RP-HPLC method compatible with LC-MS was developed for the analysis of nilotinib and its four impurities. It was validated as per the ICH guidelines and found to be linear, robust, precise, accurate, sensitive, stability indicating and can be used for routine as well as stability analysis of capsule dosage forms as well as for drug substance
