Modeling, Measurement and Mitigation of Fast Switching Issues in Voltage Source Inverters

Abstract

Wide-bandgap devices are enjoying wider adoption across the power electronics industry for their superior properties and the resulting opportunities for higher efficiency and power density. However, various issues arise due to the faster switching speed, including switching transient voltage overshoot, unstable oscillation, gate driving and evaluation difficulty, measurement and monitoring challenge, and potential load insulation degradation. This dissertation first sets out to model and understand the switching transient voltage overshoots. Unique oscillation patterns and features of the turn-on and turn-off overvoltage are discovered and analyzed, which provides new insights into the switching transient. During the experimental characterization, a new unstable oscillation pattern is found during the trench MOSFET\u27s turn-off transient. The MOSFET channel may be falsely turned back on, resulting in severe oscillation and possible loss of control. Time-domain and large-signal analytical models are established, which reveals the negative impact of common-source inductances and unconventional capacitance curve of trench MOSFET. Besides the devices themselves, another determining part in their switching transient behavior is the gate driver. A programmable gate driver platform is proposed to readily adapt to different power semiconductors and driving schemes, which can greatly facilitate the evaluation and comparison of different devices and driving schemes. The faster switching speed of wide-bandgap devices also requires more demanding measurement and monitoring solutions. A novel combinational Rogowski coil concept is proposed, which leverages the self-integrating feature to further increase the bandwidth. Prototypes achieved more than 300 MHz bandwidth, while keeping the cross-sectional area less than 2.5 mm$^2$. Finally, the very high voltage slew rate of wide-bandgap devices may negatively impact the motor load insulation. Attempting to fully utilize the higher switching frequency capability, sinewave and $dv/dt$ filters are compared. It is shown that sinewave filters can achieve higher efficiency and power density than $dv/dt$ filters, especially for high frequency applications