Ravindra, N. M.

English

Digital Commons @ New Jersey Institute of Technology (NJIT)

New Jersey Institute of Technology Digital Commons @ NJIT Physics Syllabi NJIT Syllabi Fall 2021 MTSE 301-003: Principles of Material Science and Engineering N. M. Ravindra Follow this and additional works at: https://digitalcommons.njit.edu/phys-syllabi Recommended Citation Ravindra, N. M., "MTSE 301-003: Principles of Material Science and Engineering" (2021). Physics Syllabi. 337. https://digitalcommons.njit.edu/phys-syllabi/337 This Syllabus is brought to you for free and open access by the NJIT Syllabi at Digital Commons @ NJIT. It has been accepted for inclusion in Physics Syllabi by an authorized administrator of Digital Commons @ NJIT. For more information, please contact digitalcommons@njit.edu.  1  MTSE 301 – 003   COURSE OUTLINE    Fall 2021   Principles of Material Science and Engineering - MTSE 301 003  Instructor:  Prof. N.M. Ravindra (Ravi)  Lab: TIER 414 Tel: 973 596-3278/6453  E-mail: nmravindra@gmail.com  Course Facilitator: Mr. Haizheng Zhuang PhD Candidate, Materials Science & Engineering Email Address: hz444@njit.edu  Class meeting schedule:  Book  003 94780 Face-to-Face   M R 02:30 PM - 03:50 PM 02:30 PM - 03:50 PM KUPF 117 CKB 204  Office Hours:  Ravi: Fridays 2 to 3 PM; Tiernan Building - 414 Haizheng: Thursdays – 1 to 3 PM; Tiernan Building – 323 D Online Meetings Webex platform will be used for online meetings. Conference invitation messages for the class meetings will be sent to your NJIT email addresses.  WebEx meetings will take place at: https://njit.webex.com/meet/ravindra  PREREQUISITE: Phys 111 and Phys 121, Chem 125 and Chem 126, Math 111 and Math 112 or equivalent. TEXTBOOK: “FOUNDATIONS OF MATERIAL SCIENCE AND ENGINEERING” William F. Smith, Javad Hashemi, Sixth Edition (or Fifth Edition), McGraw-Hill, Inc. YOUR FINAL LETTER GRADE in MTSE 301 will be based on a composite score for term’s work that includes one midterm exams, final exam, lecture quizzes and homework. Here are the approximate weights to be used for calculating the composite score: Exam 1 = 25% Exam 2 = 25% Final Exam = 30% Homework = 10% Lecture Quizzes = 10%  The conversion of numerical to letter grades is as follows:  > 80% A; >75% to 80% B+; >66 %to 75% B; >58%-66% C+; >50%-58% C; <50% D and <40% F.  2  COURSE POLICIES   In order to insure consistency and fairness in application of the NJIT policy on withdrawals, student requests for withdrawals after the deadline (end of the 10th week of classes) will not be permitted unless extenuating circumstances are documented through the Office of the Dean of Students. The course instructor and the Dean of Students are the principal points of contact for students considering withdrawing from a course. When a student invokes extenuating circumstances for any reason (late withdrawal from a course, request for a make-up exam, request for an Incomplete grade) the student should contact the Dean of Students Office.  Missed lecture quizzes: There are no make-ups for in-class activities. If you miss a lecture quiz, you will receive a grade of zero. HONOR CODE   “Academic Integrity is the cornerstone of higher education and is central to the ideals of this course and the university. Cheating is strictly prohibited and devalues the degree that you are working on. As a member of the NJIT community, it is your responsibility to protect your educational investment by knowing and following the academic code of integrity policy that is found at: http://www5.njit.edu/policies/sites/policies/files/academic-integrity-code.pdf.  Any student found in violation of the code by cheating, plagiarizing or using any online software inappropriately will result in disciplinary action. This may include a failing grade of F, and/or suspension or dismissal from the university. If you have any questions about the code of Academic Integrity, please contact the Dean of Students Office at dos@njit.edu ” LEARNING OUTCOMES   For this course, you can expect to be assessed on the following learning outcomes:   1. Comprehend the interrelations among structure, properties and performance of engineering materials.  2. Apply the principles of crystallography to understand the structure of materials.  3. Understand the effect of solid-state imperfections on diffusion and mechanical properties of materials.  4. Analyze phase diagrams of binary alloy systems.  5. Understand the mechanical, electrical and optical properties of metals, semiconductors, ceramics and polymers  6. Apply the equations governing different processes in solid materials. Calculate unknown quantities based on physical relationships, boundary conditions, and known quantities.   COUNSELING AND ACADEMIC SUPPORT: The Center for Counseling and Psychological Services is committed to assisting students experiencing high levels of personal challenge and stress. If you need accommodations due to a disability, please contact Ms. Chantonette Lyles, Associate Director of Disability Support Services, Fenster Hall Room 260 to discuss your specific needs.   3  Course Outline  Week 1- Introduction to Nature, Matter & Materials  ________________________________________________________________________________ Week 2- Atomic Structure and Bonds  Chapt. 2 Sect. 2.1 – 2.4   (5th)   Chapt. 2 Sect. 2.5 – 2.6   (6th)  _______________________________________________________________________________ Week 3 - Crystal and Amorphous Structure in Materials  Chapt. 3 Sect. 3.1 – 3.6   (5th)  Chapt. 3 Sect. 3.9 – 3.12  (6th)  ________________________________________________________________________________  Week 4 - Solidification, Crystalline Imperfections, Diffusion in Solids  Chapt. 4 Sect. 4.1 – 4.5   (5th)      (6th)  Chapt. 5 Sect. 5.1 – 5. 4  (5th)       (6th)  ________________________________________________________________________________  Week 5 - Mechanical Properties of Metals I  Chapt. 6 Sect.6.1 – 6.5   (5th)  Chapt. 6 Sect. 6.6 – 6.10  (6th)   EXAM 1  ________________________________________________________________________________ Week 6 - Mechanical Properties of Metals II  Chapt. 7 Sect. 7.1 – 7.7   (5th)      (6th)  ________________________________________________________________________________ Week 7 - Phase Diagrams, Engineering Alloys  Chapt. 8 Sect. 8.1 – 8.10  (5th)     (6th)   ________________________________________________________________________________  Week 8 - Engineering Alloys  Chapt. 9 Sect. 9.2 – 9.4, 8  (5th)     Chapt. 9 Sect. 9.5 – 9.7, 9  (6th)   ________________________________________________________________________________ Week 9 - Polymeric Materials     Chapt. 10 Sect. 10.1 – 10.4      (5th)  Chapt. 10 Sect. 10.6, 10.10-10.12   (6th)     ________________________________________________________________________________ Week 10 - Ceramics  Chapt. 11 Sect. 11.1 – 11.5  (5th)  Chapt. 11 Sect. 11.6 – 11.11  (6th)  ________________________________________________________________________________  4  EXAM 2  ________________________________________________________________________________  Week 11 - Composite Materials  Chapt. 12 Sect. 12.1 – 12.3  (5th)  Chapt. 12 Sect. 12.10 – 12.11  (6th)  ________________________________________________________________________________  Week 12 - Corrosion  Chapt. 13 Sect. 13.1 – 13. 4  (5th)  Chapt. 13 Sect. 13.4 – 13.7 (6th)  ________________________________________________________________________________ Week 13 - Electrical Properties of Materials  Chapt. 14 Sect. 14.1 – 14.3  (5th)  Chapt. 14 Sect. 14.4 - 14. 6    Chapt. 14. Sect. 14.7 – 14.8  (6th)  ________________________________________________________________________________ Week 14 - Optical Properties of Materials  Chapt. 15 Sect 15.1 – 15.4  (5th)  Chapt. 15 Sect 15.5 – 15.7  (6th)  ________________________________________________________________________________  Week 14 - Biological Materials and Biomaterials  Chapt. 17 Sect.17.1- 17.8   Reading only  Review – Q&A Session ________________________________________________________________________________ Final Exams  5  https://www5.njit.edu/registrar/fall-2021-academic-calendar/ Fall 2021 Academic Calendar  September   1 Wednesday   First Day of Classes September 4 Saturday Saturday Classes Begin                          September 6 Monday Labor Day September 8 Wednesday Monday Classes Meet September 8 Wednesday Last Day to Add/Drop a Class September 8 Wednesday Last Day for 100% Refund, Full or Partial Withdrawal September 9 Thursday W Grades Posted for Course Withdrawals September 15 Wednesday Last Day for 90% Refund, Full or Partial Withdrawal - No Refund for Partial Withdrawal after this date September 29 Wednesday Last Day for 50% Refund, Full Withdrawal October 20 Wednesday Last Day for 25% Refund, Full Withdrawal November 10 Wednesday Last Day to Withdraw from Classes November 25 Thursday Thanksgiving Recess Begins November 28 Sunday Thanksgiving Recess Ends December 10 Friday Last Day of Classes December 11 Saturday  Saturday Classes Meet December 12 Sunday Sunday Classes Meet December 13 Monday Reading Day 1 December 14 Tuesday Reading Day 2 December 15 Wednesday Final Exams Begin December 21 Tuesday Final Exams End December 23 Thursday Final Grades Due  6   

MTSE 301-003: Principles of Material Science and Engineering

https://digitalcommons.njit.edu/cgi/viewcontent.cgi?article=1336&context=phys-syllabi

MTSE 301-003: Principles of Material Science and Engineering

Abstract

Similar works

Full text

Available Versions

Digital Commons @ New Jersey Institute of Technology (NJIT)