Time-resolved velocities and turbulence in the oscillating flow of a pulse combustor tail pipe

Abstract

The cyclic behavior of the oscillating velocity field in the tail pipe of a pulse combustor was studied using laser doppler velocimetry. In this flow, the oscillations result from an acoustic resonance and have amplitudes of up to 5 times the mean velocity. Oscillation frequencies were varied from 67 to 101 Hz. Streamwise velocity and turbulence-intensity boundary layer profiles were measured to within 130 [mu]m of the wall, and transverse turbulence measurements were made to within 2 mm. The phase relationships of the velocity, turbulence intensity, and combustion chamber pressure oscillations are compared. Velocity oscillations near the wall are found to phase lead those in the center of the pipe, creating periodic flow reversals through the boundary layer. A comparison is made between this turbulent oscillating boundary layer and the laminar oscillating boundary layer for flow over a flat plate. The effects of axial position, pulsation frequency, pulsation amplitude, and mean flow rate on the velocity and turbulence profiles are discussed. Time-resolved wall shear stresses (directly calculated from the velocity measurements) are presented and compared with those of steady turbulent flow. Time-averaged velocity and turbulence profiles are also compared with those of conventional steady turbulent flows. The time-averaged velocity profile is found to be flatter than that of steady flow at the same mean Reynolds number, and both the streamwise and transverse turbulence intensities are found to be significantly higher than those of steady flow.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/29484/1/0000570.pd