Industrial equipment using hydraulic fluids are design to accept higher load and speed, implicitly higher temperatures, including for fluids. Leakages from enclosures like gear boxes or hydraulic systems could increase the risk of fluid reaching hot surfaces, thus producing fires hard to be controlled and isolated. The designer have to evaluate the flammability of fluids and they should select several solutions for a particular application in order to estimate the costs of different solutions and to mitigate the risk of having accidental fires due to a specific fluid grade. The tests were done with the help of an original equipment allowing a dedicated soft assistance in order to protect the operator and to sustain reproducibility, according to the standard SR EN ISO 20823:2004 Petroleum and related products. The determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test, There were tested the following grades of hydraulic oil HLP 68 X-Oil, HFC Prista, MHE 40 Prista (100% oil), a rapeseed oil (obtained after a dewaxing process) and an emulsion oil-in-water (5% vol. MHE 40 Prista). There were identified distinct behaviours of these fluids under the test condition