[EN] Electrical heat pumps for sanitary hot water production achieve a high performance with a
good matching of water and refrigerant temperature profiles during the heat rejection
stage, as it happens in CO2 systems. This work considers the thermodynamic possibility to
adapt the condenser pressure of a propane heat pump to maximize the COP, while producing
sanitary hot water up to 60 C from a heat sink equal to 15 or 25 C. The performance
of the heat pump is calculated through specific models which, in combination with
a TRNSYS model of the whole system, allowed to assess its seasonal performance for a
hotel in Strasbourg, also varying the control logic and the size of the storage tank. Results
obtained led to the conclusion that, for achieving a high seasonal performance, the control
logic of the tank has the largest influence.Part of the results of this study were developed in the mainframe of the FP7 European project ‘Next Generation of Heat Pumps working with Natural fluids’ (NxtHPG). Part of the work presented was carried by M. Tammaro during his visit at the Instituto de Ingenierı´a Energetica, Universitat Politecnica de Val encia and by C. Montagud during her visit at the Department of Industrial Engineering, Federico
II University of Naples, with the financial support of the POLIGRID project.Tammaro, M.; Montagud Montalvá, CI.; Corberán Salvador, JM.; Mauro, AW.; Mastrullo, R. (2015). A propane water-to-water heat pump booster for sanitary hot water production: Seasonal performance analysis of a new solution optimizing COP. International Journal of Refrigeration. 51:59-69. https://doi.org/10.1016/j.ijrefrig.2014.12.008S59695
