Colquhoun, Jed

Patten, Kim

Perry, Jack

Sandler, Hilary A

English

ScholarWorks@UMass Amherst

University of Massachusetts AmherstScholarWorks@UMass AmherstCranberry Station Fact Sheets Cranberry Station Outreach and Public ServiceActivities2015Avoiding Herbicide-Resistant Weeds inCranberriesJed ColquhounUniversity of WisconsinJack PerryUniversity of WisconsinHilary A SandlerUniversity of Massachusetts - AmherstKim PattenWashington State UniversityFollow this and additional works at: https://scholarworks.umass.edu/cranberry_factsheetsPart of the Life Sciences CommonsThis Article is brought to you for free and open access by the Cranberry Station Outreach and Public Service Activities at ScholarWorks@UMassAmherst. It has been accepted for inclusion in Cranberry Station Fact Sheets by an authorized administrator of ScholarWorks@UMass Amherst. Formore information, please contact scholarworks@library.umass.edu.Colquhoun, Jed; Perry, Jack; Sandler, Hilary A; and Patten, Kim, "Avoiding Herbicide-Resistant Weeds in Cranberries" (2015).Cranberry Station Fact Sheets. 34.Retrieved from https://scholarworks.umass.edu/cranberry_factsheets/34Avoiding Herbicide-Resistant Weeds in CranberriesHerbicide resistant weeds have not been as high on the radar for cranberry growers as they have been for row crop producers in recent years, but resistant weeds still can pose a significant risk.  While most cranberry production regions are isolated from grain crops — such as field corn and soybean where resistant weeds are all too common — the lack of crop rotation, a limited arsenal of control tools and weeds (including perennials) that produce abundant seed increase the risk of selecting for herbicide resistance in the cranberry system.Why are resistant weeds a concern in cranberry production?; Cranberry production relies on just a few herbicide sites of action for thevast majority of weed control.  An herbicide’s site of action describes where it works in the plant, such as by blocking a particular enzyme.  While agronomic row crop producers may be able to choose from a suite of herbicides with up to 18 different sites of action, commonly used cranberry herbicides represent only 8 different sites of action (Table 1).; Herbicides are often applied individually in cranberries because of applica-tion timing restrictions (for example, dormant pre-bud break applications vs.in-season post-emergent applications), crop safety issues when tank-mixing(surfactant incompatibility between herbicides) and herbicide label re-strictions.  This increases the selection pressure during individual herbicideapplications on a single-site herbicide to maintain its ability to prevent weedseed production.; The allowable rate range is fairly broad for several of the cranberry herbicides.The use of a sub-lethal herbicide dose can increase the resistance selectionpressure as these weeds often recover to produce viable seed.; Annual crop producers can use crop rotation to not only diversify herbicidesites of action across years but also to expand non-herbicide weed controloptions, such as cultivation.  Cranberry producers do not enjoy thesecultural options.;While perennial weeds often reproduce vegetatively (for example, throughbelow-ground runners), many of them are also prolific seed producers (gold-enrods).  Annual and biennial weeds in cranberries also produce abundantseeds. The selection for herbicide resistance and the spread of resistantweeds commonly occurs through seed production. Additionally, severalweeds in cranberries have special adaptations that allow seed to travel longdistances:  the “pontoons” that float curly dock seed in water, the wind-blownseed of Canada thistle and prolific small dodder seeds that spread amongbeds when flooding.;Weed resistance to several of the herbicide sites of action used in cranberryproduction has already been observed in other crops and production regions(Table 1).  It can happen, even in a diversified crop rotation!  In some cases, in-dividual weeds are resistant to several sites of action, greatly limiting controloptions.  Resistant weeds are a one-way trip — when they become resistantto an herbicide, they will not return to herbicide sensitivity.; New herbicide options in specialty crops like cranberries are few and far be-tween, so we need to maximize and extend the effectiveness of our currenttools so that they remain useful.1  Weed Science Society of America (WSSA) herbicide mode of action group numbers. 2  Available through a special time-limited label in Oregon and Washington only.  3  Available through a special time-limited label in several states and with various trade names.CHART KEYTable 1.  Herbicide sites of action number1 and name, active ingredients, example trade names, susceptibility and number of resistant weed species observed globally in crops other than cranberry as of 2015 (source: weedscience.com). Herbicide labels change often and vary regionally – always read and follow the label prior to use.Site of action number Site of action nameActive ingredient (example)  Susceptibility; # of  resistant speciesGroup 1  ACCase inhibitors sethoxydim (Poast)  High; 17clethodim (Select, Select Max)  High; 15Group 2  ALS inhibitors chlorimuron (Curio2)  High; 16Group 4  Synthetic auxinsclopyralid (Stinger3)  Low; 1quinclorac (QuinStar 4L)  Moderate; 52,4-D High; 16Group 9  EPSP synthase inhibitors glyphosate (Roundup)  High; 31Group 12  Carotenoid biosynthesis inhibitorsnorflurazon (Evital 5G)  Low; 0Group 15  Long chain fatty acid inhibitors napropamide (Devrinol)  Low; 0Group 20  Cellulose inhibitorsdichlobenil (Casoron 4G)  Low; 0Group 27  HPPD inhibitorsmesotrione (Callisto)  Moderate; 2How does resistance happen?Herbicides themselves are not likely to cause resistance within a plant.  The repeat-ed exposure of plants to an herbicide site of action selects for individuals within the population that differ genetically so that they survive the herbicide application and reproduce.  The selected survivor plants produce seed and the proportion of resist-ant plants increases among the overall population over time.  Repeated exposure to the same site of action further selects for higher levels of resistance among the survivor population and the cycle continues.  The result is a resistant plant popula-tion with the inherited ability to survive an herbicide application to which previous or other populations of the same species had been susceptible.  Steps to avoid herbicide-resistant weeds in cranberries1. Monitor for weeds that escape control.  Keep records of new, problematicand expanding weed populations.  The key to successful management is to identify new resistant populations early when they can still be eradicated, but oftentimes, they go unnoticed until the problem is out of control.  Keep in mind that a resistant weed will not become susceptible again.  Ask yourself a few key questions:; Is the weed of concern normally controlled by the herbicide in question?; Are there any application factors — a sprayer skip or miscalculated herbiciderate — that could account for the lack of control?; Are there dead or symptomatic weeds of a different species nearby the weedof concern?; Have you had to increase the rate of the suspect herbicide over time in orderto get control?2. Rotate herbicide sites of action, not only within a growing season butalso across years. This requires careful record keeping and an awareness ofthe site of action numbers included in Table 1 and on most herbicide labels.Pay particular attention to the herbicide sites of action where resistance hasbeen more commonly observed: the ACCase inhibitors (sethoxydim andclethodim), EPSP synthase inhibitors (glyphosate) and ALS inhibitors (chlori-muron).3. Guard against contaminated crop inputs that can spread resistant weeds.Consider all sources — seed planted along roadways and dikes; new cranber-ry vines when renovating, equipment brought on the farm; and sand/watersources.  Unfortunately, people are historically one of the greatest weeddispersal mechanisms!4. Eliminate survivors. Resistant weed populations spread through seedproduction, so efforts like hand-pulling and wick-wiping that prevent vi-able weed seed production can greatly reduce risk.  These efforts may betime-consuming, but the alternative will be much more troublesome andlong-term.  For example, in some areas where weeds are resistant to multipleherbicide sites of action, growers have had to rely heavily on hand-pullingand removing problematic weeds from fields.  Also, be sure to use herbiciderates within the labeled range and timing that will kill weeds and preventseed production.5. Ask for help. If you suspect herbicide resistance on your farm, contact yourextension agent and other specialists to help verify resistance.  Also notifyneighboring growers so they can take preventative action.Authors:  Jed Colquhoun and Jack Perry, University of Wisconsin; Hilary Sandler, University of Massachusetts; Kim Patten, Washington State UniversitySeveral weeds in cranberries have  special adaptations that allow seed to travel long distances.Prolific small dodder seeds spread among beds when flooding. Canada thistle seeds are easily blown by wind.Curly dock seek have ‘pontoons’ that float in water.December  2015

Avoiding Herbicide-Resistant Weeds in Cranberries

https://scholarworks.umass.edu/cgi/viewcontent.cgi?article=1033&amp;context=cranberry_factsheets

Avoiding Herbicide-Resistant Weeds in Cranberries

Abstract

Similar works

Full text

Available Versions

ScholarWorks@UMass Amherst