SMED was involved in two projects concerning the EU emission trading scheme1 in the years 2003 and 2004. During these projects deficits in data used by SMED to report emissions of CO2 to the EU Monitoring Mechanism and the UNFCCC were observed. Deficits include lack of activity data on the use of carbon-containing input materials within in the iron and steel industry and the production of light expanded clay aggregate (LECA). Deficits also include lack of activity data on the use of limestone and dolomite as well as flaring of excess gases, at a few plants from various industry sectors. 1 EU Directive 2003/87/EC on establishing a scheme for greenhouse gas emission allowance trading within the Community and the amending Council Directive 96/61/EC 2 Ministry of Industry, Employment and Communications, Sweden’s National Allocation Plan (2004-04-22), http://www.regeringen.se/content/1/c6/01/90/18/e9286dc2.pdf 3 Revised IPCC Guidelines for National Greenhouse Gas Inventories: Workbook 2.13.2 Within this project new activity data have been collected. Emissions have been updated and completed on the basis of collected data and data from the inquiry sent to concerned companies in order to establish the Swedish national allocation plan (NAP) for the EU emission trading scheme2 (from here on referred to as "the inquiry for the Swedish NAP") in the winter of 2004. For the iron and steel sector emissions from stationary combustion (CRF/NFR 1A2a) and from processes (CRF 2C1) have been updated. Updated emissions in CRF 2C1 are a result of new activity data on the use of carbon-containing input materials, such as electrodes, coal and coke, that are used to reduce iron ore or optimise conditions in the smelt. These emissions are defined as process emissions in the IPCC Guidelines.3 In earlier submissions these emissions have only partly been included in CRF 2C1, some emissions were completely lacking and some were incorrectly reported in CRF/NFR 1A2a. The emissions that were incorrectly reported in CRF/NFR 1A2a have been updated and reallocated to CRF 2C1. Emissions in CRF 2C1 have been completed with data from eight additional plants. The whole time series has been updated in Submission 2005. The production of light expanded clay aggregate gives rise to process emissions of CO2 that have not been known nor reported in earlier submissions. Emissions arise from the use of limestone, clay and additives and amounted to 6,308 ton CO2 in 2003. The whole time series for CRF 2A7 has been updated in Submission 2005. The use of limestone and dolomite was found to be more extensive than what had been known for earlier submissions. New activity data on the use of limestone and dolomite has been collected from nine plants. The whole time series for CRF 2A3 has been updated. The results show higher emission levels, but the difference between 1990 and 2003 is smaller in Submission 2005 compared to Submission 2004. Flaring of excess gases was found to be more extensive than what had been known for earlier submissions. New activity data has been collected from nine plants: four refineries, three steel producers, one chemical industry and one pulp producer. Calculated emissions will be reported in CRF 1B in Submission 2005 to the EU Monitoring Mechanism, the UNFCCC and the CLRTAP
