DETERMINATION OF THE EFFICIENCY OF OCCUPATIONAL HEALTH
AND SAFETY IMPLEMENTATIONS IN TURKISH MANUFACTURING
INDUSTRY AND EVALUATION OF THEM WITHIN THE INTEGRATION
PROCESS TO THE EUROPEAN UNION
Bu çalışmada, imalat sektöründeki iş sağlığı ve güvenliği uygulamalarının
etkinliği belirlenerek, ülkemizde yapılan çalışmaların Avrupa Birliği uyum
süreci çerçevesinde değerlendirilmesi amaçlanmıştır. Bu amaç doğrultusunda
biri kamu sektöründe, diğeri özel sektörde olmak üzere iki büyük sanayi
kuruluşumuzda araştırma yapılmıştır. Araştırma yapılırken işletmede çalışan
yönetici ve işçilerle birebir görüşülmüş ve daha sonra çalışanlar üzerinde
istenen verileri elde etmek amacıyla iki ayrı anket uygulanmıştır. İlk anket,
işletmenin genel bilgilerine ulaşmak amacıyla yöneticilere uygulanmıştır. İkinci
anket ise işletmede iş sağlığı ve güvenliği uygulamalarını görmek amacıyla
işçilere uygulanmıştır. Anket soruları hazırlanırken imalat sektörünün genel
yapısı dikkate alınarak, A sınıfı sertifikaya sahip iş güvenliği uzmanları,
istatistik uzmanları ve imalat sektörü çalışanlarının görüşleri dikkate alınmıştır.
Yapılan çalışmada elde edilen veriler SPSS 15.0 programına aktarılarak
araştırmanın güvenirlilik analizi için test edilmiştir. Daha sonra verilerin
güvenirliliğinden emin olunmuş ve elde edilen sonuçlar değerlendirilmiştir.
Yapılan değerlendirmeler sonucunda imalat sektöründe iş sağlığı ve güvenliği
alanında bazı olumlu uygulamalar olmasına rağmen bazı uygulamalarda
eksiklikler olduğu görülmüştür. Ayrıca ülkemizde Avrupa Birliği'ne uyum
süreci çerçevesinde bir takım yasalar çıkarılmasına rağmen bu yasaların
uygulanmasında da eksiklikler olduğu tespit edilmiştir.In this study, it has been intended that works in our country which are
evaluated process the European Union compliance framework by determining
of efficiency of applications occupational health and safety in manufacturing
sector. For this aim, a research study has been accomplished in two big
industrial institution one of which is public sector and other is private sector.
During the research the management and workers were interviewed face to
face, then two different poll was applied on the employees for obtaining the
required data. For reaching general information of institution first poll has been
applied on the management. Second poll has been applied on the workers in
order to observe the applications of occupational health and safety in the
institution. As poll questions were being prepared, general structure of
manufacturing sector, ideas of experts of occupational safetly who has A class
certificate, experts of statistics and employees of manufacturing sector have
been taken into consideration. In the study, obtained data has been tested by
translating to the SPSS 15.0 program for safety analysis. After being sure for
the reliability of data, obtained results have been evaluated. In the conclusion of
evaluations, in the manufacturing sector, although there are several positive
applications in the occupational health and safety area, it has been determined
that there are deficiencies in some applications. Moreover, in our country,
although some legislution has been prepared regarding the process of European
Union compliance framework, deficiencies have been determined in the
applications of these laws