Traditionally, polyurethanes (PU) are manufactured by reacting isocyanates with petroleum-based polyols (polyether or polyester). Because oil resources are diminishing and are becoming expensive to produce, engineers and scientist have discovered new technologies to fabricate plastics from renewable resources. The goal of this work was to determine mechanical properties of polyurethanes synthesized from castor oil and different isocyantes: isophorone diisocyanate IPDI, 1,6-diisocyanatohexane (HDI) and aliphatic polycyclotrimer (HDIt). The samples were prepared by a one-step reactive process with stoichiometric balance of reactive groups. The catalysed synthesis was performed at normal pressure. It was estimated that a mechanical properties of prepared samples were strongly influenced by the isocyanate type.Tradicionalno se poliuretani (PU) dobijaju reagovanjem izocijanata sa poliolima (polietarski i poliestarski) koji se uobičajeno dobijaju iz nafte. Pošto se ti resursi smanjuju i postaju sve skuplji inženjeri i naučnici su razvili nove tehnologije za proizvodnju plastike iz obnovljivih sirovina. Cilj ovog rada je bio da se odrede mehanička svojstva poluretanskih materijala dobijenih jednostepenim reaktivnim procesom od ricinusovog ulja i različitih izocijanata: izoforon diizocijanata (IPDI), 1,6-diisocianatoheksana (HDI) i alifatičnog poliizocijanata ciklotrimera (HDIt) sa stehiometrijskim balansom reaktivnih grupa. Katalitička sinteza se odvijala na normalnom pritisku. Ustanovljeno je da su mehanička svojstva dobijenih materijala bila uslovljena tipom izocijanata