Mechanical Properties of Tank Car Steels Retired from the Fleet,” Southwest Research Institute Report to Volpe Center,

Abstract

ABSTRACT As a consequence of recent accidents involving the release of hazardous materials (hazmat), the structural integrity and crashworthiness of railroad tank cars have come under scrutiny. Particular attention has been given to the older portion of the fleet that was built prior to steel normalization requirements instituted in 1989. This paper describes a laboratory testing program to examine the mechanical properties of steel samples obtained from tank cars that were retired from the fleet. The test program consisted of two parts: (1) material characterization comprised of chemical, tensile and Charpy V-notch (CVN) impact energy and (2) high-rate fracture toughness testing. In total, steel samples from 34 tank cars were received and tested. These 34 tank cars yielded 61 different pre-1989 TC128-B conditions (40 shell and 21 head samples), three tank cars yielded seven different post-1989 TC128-B conditions (four shell and three head samples), and six tank cars yielded other material (A212, A515, and A285 steel) conditions (six shell and five head samples). The vast majority of the TC128-B samples extracted from retired tank cars met current TC128-B material specifications. Elemental composition requirements were satisfied in 97 percent of the population whereas the required tensile properties were satisfied in 82 percent of the population. Interpretation of the high-rate fracture toughness tests required dividing the pre-1989 fleet into quartiles that depended on year of manufacture or age, and testing three tank cars per quartile. Considering the high-rate fracture toughness results at 0ºF for the pre-1989 fleet, 100 percent of the oldest two quartiles, 58 percent of the second youngest quartile, and 83 percent of the youngest quartile exhibited adequate or better fracture toughness (defined as toughness greater than 50 ksi√in). Highrate fracture toughness at -50ºF was adequate for 83 percent of two quartiles (the youngest and second oldest), but the other two quartiles exhibited lower toughness with only 33 (2 nd youngest) to 50 percent (oldest) exhibiting adequate properties