Abstract. This work is focusing on exploring preparing processes to tailor the microstructure of carbon nanotube (CNT) reinforced silicon nitride-based ceramic composites. Samples with different porosity's and different amount (1, 3 or 5 wt%) of carbon nanotubes have been prepared by using gas pressure sintering or hot isostatic pressing. In comparison, composites with 1wt%, 5wt% or 10wt% carbon black and graphite have been manufactured. We measured the room temperature mechanical and electrical properties, examined the micro and nano structure by X-ray diffraction and electron microscopy. It was found that it is possible to develop CNT-silicon nitride composite for applications where a decent electric conductivity and good mechanical properties are required