Cored Rutherford cable for the GSI fast ramping synchrotron

Abstract

Abstract-The new heavy ion synchrotron facility proposed by GSI will have two superconducting magnet rings in the same tunnel, with rigidities of 200T-m and 100T.m. Fast ramp times are needed, which can cause significant problems for the magnets, particularly in the areas of s c loss and field distortion. This paper discusses the 200T.m ring, which will use Cos0 magnets based on the RHIC dipole design. We discuss the reasons for choosing Rutherford cable with a resistive core and report loss measurements carried out on cable samples. These measurements are compared with theoretical calculations using measured values of inter-strand resistance. Reasonably good agreement is found, but there are indications of non-uniformity in the adjacent resistance R,. Using these measured parameters, losses and temperature rise are calculated for a RHIC dipole in the operating cycle of the accelerator. A novel insulation scheme designed to promote efficient cooling is described. Index Terms--ac loss, dipole magnet, field error, superconducting synchrotron, Rutherford cable