Abstract Using the optimum resources possible in designing the hydraulic presses frame can effect reduction in the cost of the hydraulic presses. By optimizing the weight of material utilized for building the structure. An attempt has been made in this direction to reduce the volume of material. So here we consider an industrial application project consisting of mass minimization of H-frame type hydraulic press. This press has to compensate the forces acting on the working plates and has to fulfill certain critical constraints. ANSYS has been used for this analysis the main aim is to reduce the cost of the Hydraulic presses without compromising on the quality of the output. With regarding to design specification, stress distribution, deflection, and cost, are focused on optimized design. The methodology followed in this work is comparison of stresses induced in machine for different thickness used for construction of frame and column of the Hframe type hydraulic press.