ADVANCING THE SEPARATION SCIENCES THROUGH THE DELIVERY OF NEW MATERIALS, TECHNOLOGY AND METHODOLOGY.

A thesis and collection of works submitted to Plymouth University in partial fulfilment for the degree of DOCTOR OF SCIENC

Strategies to prevent the occurrence of resistance against antibiotics by using advanced materials

This is a post-peer-review, pre-copyedit version of an article published in Applied microbiology and biotechnology The final authenticated version is available online at: http://dx.doi.org/10.1007/s00253-018-8776-0Drug resistance occurrence is a global healthcare concern responsible for the increased morbidity and mortality in hospitals, time of hospitalisation and huge financial loss. The failure of the most antibiotics to kill Bsuperbugs^ poses the urgent need to develop innovative strategies aimed at not only controlling bacterial infection but also the spread of resistance. The prevention of pathogen host invasion by inhibiting bacterial virulence and biofilm formation, and the utilisation of bactericidal agents with different mode of action than classic antibiotics are the two most promising new alternative strategies to overcome antibiotic resistance. Based on these novel approaches, researchers are developing different advanced materials (nanoparticles, hydrogels and surface coatings) with novel antimicrobial properties. In this review, we summarise the recent advances in terms of engineered materials to prevent bacteria-resistant infections according to the antimicrobial strategies underlying their design.Peer ReviewedPostprint (author's final draft

Enhanced Delivery of Rituximab Into Brain and Lymph Nodes Using Timed-Release Nanocapsules in Non-Human Primates.

Tumor metastasis into the central nervous system (CNS) and lymph nodes (LNs) is a major obstacle for effective therapies. Therapeutic monoclonal antibodies (mAb) have revolutionized tumor treatment; however, their efficacy for treating metastatic tumors-particularly, CNS and LN metastases-is poor due to inefficient penetration into the CNS and LNs following intravenous injection. We recently reported an effective delivery of mAb to the CNS by encapsulating the anti-CD20 mAb rituximab (RTX) within a thin shell of polymer that contains the analogs of choline and acetylcholine receptors. This encapsulated RTX, denoted as n-RTX, eliminated lymphoma cells systemically in a xenografted humanized mouse model using an immunodeficient mouse as a recipient of human hematopoietic stem/progenitor cells and fetal thymus more effectively than native RTX; importantly, n-RTX showed notable anti-tumor effect on CNS metastases which is unable to show by native RTX. As an important step toward future clinical translation of this technology, we further analyzed the properties of n-RTX in immunocompetent animals, rats, and non-human primates (NHPs). Our results show that a single intravenous injection of n-RTX resulted in 10-fold greater levels in the CNS and 2-3-fold greater levels in the LNs of RTX, respectively, than the injection of native RTX in both rats and NHPs. In addition, we demonstrate the enhanced delivery and efficient B-cell depletion in lymphoid organs of NHPs with n-RTX. Moreover, detailed hematological analysis and liver enzyme activity tests indicate n-RTX treatment is safe in NHPs. As this nanocapsule platform can be universally applied to other therapeutic mAbs, it holds great promise for extending mAb therapy to poorly accessible body compartments

Understanding Three Hydration-Dependent Transitions of Zwitterionic Carboxybetaine Hydrogel by Molecular Dynamics Simulations

In this work, molecular dynamics simulations were performed to study a carboxybetaine methacrylate (CBMA) hydrogel under various swelling states. The water content in this study ranged from 28% to 91% of the total weight of the hydrogel. Three transitions of the CBMA hydrogel were observed as the water content increased. The first transition occurs when the water content increases from 33% to 37%. The observed kink in the self-diffusion coefficient of water indicates that the hydration of the polymer network of the hydrogel is saturated; the further added water is in a less confined state. The second transition was found to be related to the physical cross-links of the polymer network. As the water content rises to above 62%, the lifetime of the physical cross-links decreases significantly. This abrupt change in the lifetime indicates that the transition represents the equilibrium swelling state of the hydrogel. Finally, the third transition was observed when the water content goes above 81%. The significant increases in the bond and angle energies of the polymer network indicate that the hydrogel reaches its upper limit swelling state at this transition. These results are comparable to previously published experimental studies of similar zwitterionic hydrogels

Lubrication at physiological pressures by polyzwitterionic brushes

The very low sliding friction at natural synovial joints, which have friction coefficients of mu < 0.002 at pressures up to 5 megapascals or more, has to date not been attained in any human-made joints or between model surfaces in aqueous environments. We found that surfaces in water bearing polyzwitterionic brushes that were polymerized directly from the surface can have m values as low as 0.0004 at pressures as high as 7.5 megapascals. This extreme lubrication is attributed primarily to the strong hydration of the phosphorylcholine-like monomers that make up the robustly attached brushes, and may have relevance to a wide range of human-made aqueous lubrication situations

Novel "green" catalysts for controlled ring-opening polymerization of lactide

Syntéza polylaktidu (PLA) polymerací za otevření kruhu cyklického monomeru (ROP) může být uskutečněna různými způsoby. Literatura uvádí více než 100 katalytických systémů, jejichž pomocí lze polylaktid a jiné biodegradabilní alifatické polyestery získat. Například organokovové katalyzátory na bázi Sn, Zn, Al atd. se po splnění své polymerační funkce stávají kontaminanty a pro humánní implantáty je použití takového materiálu diskutabilní. V současné době jsou v centru výzkumné pozornosti nové N-heterocyklické karbenové katalyzátory. Tyto „metal-free“ katalytické struktury jsou schopné reprodukovatelně řídit syntézu polymerů předem definované molekulové hmotnosti s definovanými koncovými skupinami a nízkou polydisperzitou, která je charakteristická pro živý průběh polymerace. Nabízí se možnost syntézy blokových kopolymerů a různorodých makromolekulárních architektur. Předložená diplomová práce se zabývá studiem polymerace cyklického monomeru D,L-laktidu katalyzované N-heterocyklickým karbenem. Polymerace byly vedeny v přítomnosti benzylalkoholu jako iniciátoru v roztoku THF. Byl sledován vliv složení reakčního systému monomer – iniciátor – katalyzátor. Dále byly připraveny polymery opticky čistého L-laktidu s makroiniciátory PEG s Mn = 1000 a 2000 g/mol. Střední číselná molekulová hmotnost (Mn) a polydisperzita (PDI) byly stanoveny pomocí GPC. Definovatelnost koncových skupin vybraných polymerů byla prokázána pomocí 1H NMR.The synthesis of polylactide (PLA) by ring-opening polymerization (ROP) of cyclic monomer can be realized by different routes. More than 100 catalysts for the synthesis of polylactide and other biodegradable aliphatic polyesters are published in the literature. For example organometallic catalysts based on Sn, Zn, Al etc. after finishing polymerization function became contaminants and using obtained polymer material in human body is controversial. At present, the research is focused on novel N-hererocyclic carbene catalysts. These metal-free catalysts are able to produce polymers with controlled molecular weight, narrow polydispersity, end-group fidelity with high reproducibility as well as to synthesize the block copolymers and complex macromolecular architectures, which is characteristic for living polymerization system. This diploma thesis is focused on study of polymerization of cyclic monomer D,L-lactide catalyzed by N-hererocyclic carbene. Polymerizations were carried out at the presence of benzylalcohol as initiator at THF. We were focused on the influence of composition of reaction system monomer – initiator – catalyst. Polymers of optically pure L-lactide with macroinitiators PEG with Mn of 1000 a 2000 g/mol were prepared as well. Number average molecular weight (Mn) and polydispersity index (PDI) was determined by GPC. 1H NMR was used to prove end-group fidelity.

Theory of polyzwitterion conformations

Conformational characteristics of polyzwitterionic molecules in aqueous solutions are investigated using the variational method. Analytical relations are derived for the radius of gyration of a single polyzwitterionic chain as a function of the chain length, electrostatic interaction strength, added salt concentration, dipole moment and degree of ionization of the zwitterionic monomers. In the absence of the small ions (counterions and coions) near the polyzwitterionic chain, attractive dipole-dipole interactions are shown to induce a collapse of the polyzwitterionic chain. However, in the presence of the small ions, the radius of gyration is shown to be an interplay of the screening of the electrostatic interactions and the counterion adsorption on the zwitterionic sites. In addition to the well-known Debye-Huckel screening of the charge-charge interactions, screening of the charge-dipole and dipole-dipole interactions are found to play important roles in determining the size of the chain. Functional forms for the screened charge-dipole and dipole-dipole interaction potentials are presented. Furthermore, counterion adsorption on the zwitterionic monomers is predicted to be asymmetric depending on the nature of the added salt and the zwitterionic groups. Qualitative remarks regarding the solubility of these molecules in aqueous solutions along with the classical "anti-polyelectrolyte" effect (increase in the solubility in water with the addition of salt) are presented.Comment: To be appeared in J. Chem. Phy