Cost and losses associated with offshore wind farm collection networks which centralise the turbine power electronic converters

Costs and losses have been calculated for several different network topologies, which centralise the turbine power electronic converters, in order to improve access for maintenance. These are divided into star topologies, where each turbine is connected individually to its own converter on a platform housing many converters, and cluster topologies, where multiple turbines are connected through a single large converter. Both AC and DC topologies were considered, along with standard string topologies for comparison. Star and cluster topologies were both found to have higher costs and losses than the string topology. In the case of the star topology, this is due to the longer cable length and higher component count. In the case of the cluster topology, this is due to the reduced energy capture from controlling turbine speeds in clusters rather than individually. DC topologies were generally found to have a lower cost and loss than AC, but the fact that the converters are not commercially available makes this advantage less certain

Experimental investigation of the softening-stiffening response of tensegrity prisms under compressive loading

The present paper is concerned with the formulation of new assembly methods of bi-material tensegrity prisms, and the experimental characterization of the compressive response of such structures. The presented assembly techniques are easy to implement, including a string-first approach in the case of ordinary tensegrity prisms, and a base-first approach in the case of systems equipped with rigid bases. The experimental section shows that the compressive response of tensegrity prisms switches from stiffening to softening under large displacements, in dependence on the current values of suitable geometric and prestress variables. Future research lines regarding the mechanical modeling of tensegrity prisms and their use as building blocks of nonlinear periodic lattices and acoustic metamaterials are discussed

On a nonlinear nonlocal hyperbolic system modeling suspension bridges

We suggest a new model for the dynamics of a suspension bridge through a system of nonlinear nonlocal hyperbolic differential equations. The equations are of second and fourth order in space and describe the behavior of the main components of the bridge: the deck, the sustaining cables and the connecting hangers. We perform a careful energy balance and we derive the equations from a variational principle. We then prove existence and uniqueness for the resulting problem

The adequacy of the present practice in dynamic aggregated modelling of wind farm systems

Large offshore wind farms are usually composed of several hundred individual wind turbines, each turbine having its own complex set of dynamics. The analysis of the dynamic interaction between wind turbine generators (WTG), interconnecting ac cables, and voltage source converter (VSC) based High Voltage DC (HVDC) system is difficult because of the complexity and the scale of the entire system. The detailed modelling and modal analysis of a representative wind farm system reveal the presence of several critical resonant modes within the system. Several of these modes have frequencies close to harmonics of the power system frequency with poor damping. From a computational perspective the aggregation of the physical model is necessary in order to reduce the degree of complexity to a practical level. This paper focuses on the present practices of the aggregation of the WTGs and the collection system, and their influence on the damping and frequency characteristics of the critical oscillatory modes. The effect of aggregation on the critical modes are discussed using modal analysis and dynamic simulation. The adequacy of aggregation method is discussed

The IceCube Neutrino Observatory: Instrumentation and Online Systems

The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable systems, computing hardware, and our methodology for drilling and deployment. We also describe the online triggering and data filtering systems that select candidate neutrino and cosmic ray events for analysis. Due to a rigorous pre-deployment protocol, 98.4% of the DOMs in the deep ice are operating and collecting data. IceCube routinely achieves a detector uptime of 99% by emphasizing software stability and monitoring. Detector operations have been stable since construction was completed, and the detector is expected to operate at least until the end of the next decade.Comment: 83 pages, 50 figures; updated with minor changes from journal review and proofin

Closed-form equation for natural frequencies of beams under full range of axial loads modeled with a spring-mass system

A new simple closed-form equation that accurately predicts the effect of an arbitrarily large constant axial load, residual stress or temperature shift on the natural frequencies of an uniform single-span beam, with various end conditions, is presented. Its accuracy and applicability range are studied by comparing its predictions with numerical simulations and with the approximate Galef’s and Bokaian’s formulas. The new equation may be understood as a refinement or extension of these two approximate formulas. Significant accuracy and applicability range improvements are achieved, especially near the buckling point and for large and moderate axial load. The new closed-form equation is applicable in the full range of axial load, i.e., from the buckling load to the tensioned-string limit. It also models well the beam-to-string transition region for the eight boundary conditions studied. It works remarkably well in the free-free and sliding-free cases, where it is a near-exact solution. In addition, it yields the natural frequencies of a 1-D spring-mass system that may be used to model tensioned beams, and potentially, more complex systems.Peer ReviewedPostprint (published version

Disseny i construcció d'una sonda atmosfèrica

The project consists of the construction of a functional meteorological probe, controlled by an Arduino microcontroller. This probe was design to measure pressure and temperature as functions of the altitude. This device is the first of its kind built at the EETAC, thus a considerable effort of requirement definition has been done. In the present report we describe how all the probesystems were designed, and all the necessary components as well as the reason why they were chosen are described. The resulting design is modular in order to facilitate future improvements/expansions.The steps necessary for the assembly of all the components in a common structure are detailed, as well as the choice of tools and materials. All the systems developed were tested simulating conditions similar to those expected in the real mission.Finally, after the construction and validation processes, all the materials and the tasks needed to launch the probe up to at an altitude of 35 km are detailed.The present report is intended to serve as a guide for futuresimilar projects in EETAC. The resulting device from this work is named FourCast after our surnames