4,314 research outputs found
Sliding Mode Control With PID Sliding Surface for Active Vibration Damping of Pneumatically Actuated Soft Robots
This paper proposes a novel active vibration damping mechanism for soft robots. In recent years, soft robots have gained increasing research attention for robotic researchers and industrial developers alike. Soft robots offer a significant number of advantages when it comes to the handling of fragile objects, clinical rehabilitation tasks, and human-machine interaction. Soft robots demonstrate a high degree of compliance and safety because of their inherent softness, achieving the same with rigid robots will require intricate controller design and sensing mechanisms. However, the most commonly used soft robots use pneumatic systems for actuation. These pneumatic soft robots undergo large amplitude vibrations when deactuated suddenly. These vibrations not only decrease the accuracy of these soft robots but also compromise their structural integrity, which results in a decrease in their useable lifespan. An active vibration damping mechanism is very much needed to increase the utility of soft robots in industrial applications. To accurately control the dynamic behavior of soft robots, we propose a sliding mode based controller with PID sliding surface. The proposed controller uses feedback error to define a PID sliding surface, and a nonlinear sliding mode controller works to keep the system attached to the sliding surface. The coefficients of the PID sliding surface determine the dynamic behavior of the soft robot. The performance of the proposed controller is verified by using a multi-chambered parallel soft robot. The experimental results demonstrate that the proposed controller can suppress vibration amplitude to a decidedly smaller range
Discrete Cosserat Approach for Multi-Section Soft Robots Dynamics
In spite of recent progress, soft robotics still suffers from a lack of
unified modeling framework. Nowadays, the most adopted model for the design and
control of soft robots is the piece-wise constant curvature model, with its
consolidated benefits and drawbacks. In this work, an alternative model for
multisection soft robots dynamics is presented based on a discrete Cosserat
approach, which, not only takes into account shear and torsional deformations,
essentials to cope with out-of-plane external loads, but also inherits the
geometrical and mechanical properties of the continuous Cosserat model, making
it the natural soft robotics counterpart of the traditional rigid robotics
dynamics model. The soundness of the model is demonstrated through extensive
simulation and experimental results for both plane and out-of-plane motions.Comment: 13 pages, 9 figure
Collision-Aware Fast Simulation for Soft Robots by Optimization-Based Geometric Computing
Soft robots can safely interact with environments because of their mechanical
compliance. Self-collision is also employed in the modern design of soft robots
to enhance their performance during different tasks. However, developing an
efficient and reliable simulator that can handle the collision response well,
is still a challenging task in the research of soft robotics. This paper
presents a collision-aware simulator based on geometric optimization, in which
we develop a highly efficient and realistic collision checking / response model
incorporating a hyperelastic material property. Both actuated deformation and
collision response for soft robots are formulated as geometry-based objectives.
The collision-free body of a soft robot can be obtained by minimizing the
geometry-based objective function. Unlike the FEA-based physical simulation,
the proposed pipeline performs a much lower computational cost. Moreover,
adaptive remeshing is applied to achieve the improvement of the convergence
when dealing with soft robots that have large volume variations. Experimental
tests are conducted on different soft robots to verify the performance of our
approach
Recommended from our members
A compact low-cost electronic hardware design for actuating soft robots
A low cost, compact embedded design approach for actuating soft robots is presented. The complete fabrication procedure and mode of operation was demonstrated, and the performance of the complete system was also demonstrated by building a microcontroller based hardware system which was used to actuate a soft robot for bending motion. The actuation system including the electronic circuit board and actuation components was embedded in a 3D-printed casing to ensure a compact approach for actuating soft robots. Results show the viability of the system in actuating and controlling siliconebased soft robots to achieve bending motions. Qualitative measurements of uniaxial tensile test, bending distance and pressure were obtained. This electronic design is easy to reproduce and integrate into any specified soft robotic device requiring pneumatic actuation
Stiffness Change for Reconfiguration of Inflated Beam Robots
Active control of the shape of soft robots is challenging. Despite having an
infinite number of passive degrees of freedom (DOFs), soft robots typically
only have a few actively controllable DOFs, limited by the number of degrees of
actuation (DOAs). The complexity of actuators restricts the number of DOAs that
can be incorporated into soft robots. Active shape control is further
complicated by the buckling of soft robots under compressive forces; this is
particularly challenging for compliant continuum robots due to their long
aspect ratios. In this work, we show how variable stiffness can enable shape
control of soft robots by addressing these challenges. Dynamically changing the
stiffness of sections along a compliant continuum robot can selectively
"activate" discrete joints. By changing which joints are activated, the output
of a single actuator can be reconfigured to actively control many different
joints, thus decoupling the number of controllable DOFs from the number of
DOAs. We demonstrate embedded positive pressure layer jamming as a simple
method for stiffness change in inflated beam robots, its compatibility with
growing robots, and its use as an "activating" technology. We experimentally
characterize the stiffness change in a growing inflated beam robot and present
finite element models which serve as guides for robot design and fabrication.
We fabricate a multi-segment everting inflated beam robot and demonstrate how
stiffness change is compatible with growth through tip eversion, enables an
increase in workspace, and achieves new actuation patterns not possible without
stiffening
- …