Rupture Test and Bioavailability of Oil-Soluble Vitamins

In lieu of an abstract, here is the article\u27s first paragraph: Bioavailability of multi-vitamins as dietary supplements has always been a concern. Dissolution studies have been successfully used to predict drug release of bioactive molecules, but with vitamins there are some exceptions. United State Pharmacopoeia (USP) defines the dissolution requirements of multi-vitamin supplements based on the composition and type of dosage form. As oil-soluble vitamins do not meet the criterion of “dissolution”, the performance of dosage forms containing such vitamins is evaluated by disintegration studies primarily. Dissolution studies are not applicable for such dosage forms [1]

Patient acceptability, safety and access : A balancing act for selecting age-appropriate oral dosage forms for paediatric and geriatric populations

© 2017 Elsevier B.V. All rights reserved.The selection and design of age-appropriate formulations intended for use in paediatric and geriatric patients are dependent on multiple factors affecting patient acceptability, safety and access. The development of an economic and effective product relies on a balanced consideration of the risks and benefits of these factors. This review provides a comprehensive and up-to-date analysis of oral dosage forms considering key aspects of formulation design including dosage considerations, ease of use, tolerability and safety, manufacturing complexity, stability, supply and cost. Patient acceptability has been examined utilising an evidence-based approach to evaluate regulatory guidance and literature. Safety considerations including excipients and potential risk of administration errors of the different dosage forms are also discussed, together with possible manufacturing and supply challenges. Age appropriate drug product design should consider and compare i) acceptability ii) safety and iii) access, although it is important to recognise that these factors must be balanced against each other, and in some situations a compromise may need to be reached when selecting an age-appropriate formulation.Peer reviewedFinal Accepted Versio

Investigation of the Cinnamon Influence on the Wheat Bread Quality Enriched with Flax Seeds Oil Meal

The materials of the article are studies that are conducted with the aim of expanding the use of non-traditional raw materials for functional purposes in the technology of bakery products. Research is conducted to determine the effect of spiciness cinnamon on the quality of semi-finished products and finished bakery products from wheat flour enriched with flax seeds oil meal.To improve the quality of wheat bread, enriched with flax seeds oil meal, and expand the assortment of bakery products with health properties, the authors propose to use spice cinnamon in the formula of wheat bread in an amount of up to 2 % of the weight of flour. The taste and aroma of these products is characteristic of wheat bread with a pleasant cinnamon flavor. Dosage of cinnamon to 4 % of the flour mass also provides good consumer characteristics of products, however, more pronounced flavor and flavor of cinnamon can limit the circle of consumers of such products. The use of 6 % of cinnamon in the recipe of products leads to a significant deterioration in the volume of products and provides them with too intense flavor. Determination of the content of bisulphite-binding substances in the crumb and crust of products is confirmed by improvements in the fragrance of products with the addition of cinnamon.It has been established that the cinnamon in dough leads to an increase in the elastic properties of gluten, and the more, the more it is added. Along with this, it is noted that cinnamon leads to a decrease in the fermentation intensity of the dough. This is probably due to the active antibacterial properties of cinnamon, which suppress the yeast fermentation activity. These factors and cause the deterioration of the volume of finished products in the case of dosing cinnamon in an amount of 4 % or more.It has been proved that on the indicators of crumbling and deformation of the crumb, products with added cinnamon retain their freshness similarly to the control one. However, it is noted that the introduction of cinnamon reduces the amount of mold of microflora in products

Nanogels for pharmaceutical and biomedical applications and their fabrication using 3D printing technologies

Nanogels are hydrogels formed by connecting nanoscopic micelles dispersed in an aqueous medium, which give an opportunity for incorporating hydrophilic payloads to the exterior of the micellar networks and hydrophobic payloads in the core of the micelles. Biomedical and pharmaceutical applications of nanogels have been explored for tissue regeneration, wound healing, surgical device, implantation, and peroral, rectal, vaginal, ocular, and transdermal drug delivery. Although it is still in the early stages of development, due to the increasing demands of precise nanogel production to be utilized for personalized medicine, biomedical applications, and specialized drug delivery, 3D printing has been explored in the past few years and is believed to be one of the most precise, efficient, inexpensive, customizable, and convenient manufacturing techniques for nanogel production

How to improve drug dosing for patients with renal impairment in primary care - a cluster-randomized controlled trial

Background: Patients with chronic kidney disease (CKD) are at increased risk for inappropriate or potentially harmful prescribing. The aim of this study was to examine whether a multifaceted intervention including the use of a software programme for the estimation of creatinine clearance and recommendation of individual dosage requirements may improve correct dosage adjustment of relevant medications for patients with CKD in primary care. Methods: A cluster-randomized controlled trial was conducted between January and December 2007 in small primary care practices in Germany. Practices were randomly allocated to intervention or control groups. In each practice, we included patients with known CKD and elderly patients (>=70 years) suffering from hypertension. The practices in the intervention group received interactive training and were provided a software programme to assist with individual dose adjustment. The control group performed usual care. Data were collected at baseline and at 6 months. The outcome measures, analyzed across individual patients, included prescriptions exceeding recommended maximum daily doses, with the primary outcome being prescriptions exceeding recommended standard daily doses by 30% or more. Results: Data from 44 general practitioners and 404 patients are included. The intervention was effective in reducing prescriptions exceeding the maximum daily dose per patients, with a trend in reducing prescriptions exceeding the standard daily dose by more than 30%. Conclusions: A multifaceted intervention including the use of a software program effectively reduced inappropriately high doses of renally excreted medications in patients with CKD in the setting of small primary care practices

Water dispersible microbicidal cellulose acetate phthalate film

BACKGROUND: Cellulose acetate phthalate (CAP) has been used for several decades in the pharmaceutical industry for enteric film coating of oral tablets and capsules. Micronized CAP, available commercially as "Aquateric" and containing additional ingredients required for micronization, used for tablet coating from water dispersions, was shown to adsorb and inactivate the human immunodeficiency virus (HIV-1), herpesviruses (HSV) and other sexually transmitted disease (STD) pathogens. Earlier studies indicate that a gel formulation of micronized CAP has a potential as a topical microbicide for prevention of STDs including the acquired immunodeficiency syndrome (AIDS). The objective of endeavors described here was to develop a water dispersible CAP film amenable to inexpensive industrial mass production. METHODS: CAP and hydroxypropyl cellulose (HPC) were dissolved in different organic solvent mixtures, poured into dishes, and the solvents evaporated. Graded quantities of a resulting selected film were mixed for 5 min at 37°C with HIV-1, HSV and other STD pathogens, respectively. Residual infectivity of the treated viruses and bacteria was determined. RESULTS: The prerequisites for producing CAP films which are soft, flexible and dispersible in water, resulting in smooth gels, are combining CAP with HPC (other cellulose derivatives are unsuitable), and casting from organic solvent mixtures containing ≈50 to ≈65% ethanol (EtOH). The films are ≈100 µ thick and have a textured surface with alternating protrusions and depressions revealed by scanning electron microscopy. The films, before complete conversion into a gel, rapidly inactivated HIV-1 and HSV and reduced the infectivity of non-viral STD pathogens >1,000-fold. CONCLUSIONS: Soft pliable CAP-HPC composite films can be generated by casting from organic solvent mixtures containing EtOH. The films rapidly reduce the infectivity of several STD pathogens, including HIV-1. They are converted into gels and thus do not have to be removed following application and use. In addition to their potential as topical microbicides, the films have promise for mucosal delivery of pharmaceuticals other than CAP

A phytochemical comparison of saw palmetto products using gas chromatography and (1) H nuclear magnetic resonance spectroscopy metabolomic profiling

© 2014 The Authors. Journal of Pharmacy and Pharmacology published by John Wiley & Sons Ltd on behalf of Royal Pharmaceutical Society. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly citedPreparations containing saw palmetto berries are used in the treatment of benign prostatic hyperplasia (BPH). There are many products on the market, and relatively little is known about their chemical variability and specifically the composition and quality of different saw palmetto products notwithstanding that in 2000, an international consultation paper from the major urological associations from the five continents on treatments for BPH demanded further research on this topic. Here, we compare two analytical approaches and characterise 57 different saw palmetto products.Peer reviewedFinal Published versio

Soluplus solutions as thermothickening materials for topical drug delivery.

Soluplus is a pharmaceutical excipient used primarily in the manufacture of solid dispersions. The polymer also exhibits interesting rheology in aqueous solution, increasing in viscosity as the solution is warmed. This material could have application topical drug delivery to sites including the skin, vagina, rectum or nasal mucosa, where the increase in viscosity allows for improved retention. However, there exists very little information surrounding this “thermothickening” phenomenon and the effect of solution composition on temperature-dependent rheology. In this study, the effect of soluplus concentration, salt inclusion, ethanol addition, and pH on temperature-dependent rheology was measured. The rheology of the solutions was unaffected by pH over the range tolerated by the skin (pH 4–7), but the inclusion of ethanol rapidly negated the thermothickening effect. “Salting out” of the solutions resulted in a depression of gelation temperatures, and an increase in both storage and loss moduli of the solutions. 30% (w/v) soluplus in 1 M NaCl or KCl was identified as a potential thermothickening agent for topical drug delivery.Peer reviewe