Chemical weathering and provenance evolution of Holocene–Recent sediments from the Western Indus Shelf, Northern Arabian Sea inferred from physical and mineralogical properties

We present a multi-proxy mineral record based on X-ray diffraction and diffuse reflectance spectrophotometry analysis for two cores from the western Indus Shelf in order to reconstruct changing weathering intensities, sediment transport, and provenance variations since 13 ka. Core Indus-10 is located northwest of the Indus Canyon and exhibits fluctuations in smectite/(illite + chlorite) ratios that correlate with monsoon intensity. Higher smectite/(illite + chlorite) and lower illite crystallinity, normally associated with stronger weathering, peaked during the Early–Mid Holocene, the period of maximum summer monsoon. Hematite/goethite and magnetic susceptibility do not show clear co-variation, although they both increase at Indus-10 after 10 ka, as the monsoon weakened. At Indus-23, located on a clinoform just west of the canyon, hematite/goethite increased during a period of monsoon strengthening from 10 to 8 ka, consistent with increased seasonality and/or reworking of sediment deposited prior to or during the glacial maximum. After 2 ka terrigenous sediment accumulation rates in both cores increased together with redness and hematite/goethite, which we attribute to widespread cultivation of the floodplain triggering reworking, especially after 200 years ago. Over Holocene timescales sediment composition and mineralogy in two localities on the high-energy shelf were controlled by varying degrees of reworking, as well as climatically modulated chemical weathering

Elucidating the crystal-chemistry of Jbel Rhassoul stevensite (Morocco) by advanced analytical techniques

The composition of Rhassoul clay is controversial regarding the nature of the puremineral clay fraction which is claimed to be stevensite rather than saponite. In this study, the raw and mineral fractions were characterized using various techniques including Fourier transform infrared spectroscopy and magic angle spinning nuclear magnetic resonance (MAS NMR). The isolated fine clay mineral fraction contained a larger amount of Al (>1 wt.%) than that reported for other stevensite occurrences. The 27Al MAS NMR technique confirmed that the mineral is stevensite in which the Al is equally split between the tetrahedral and octahedral coordination sites. The 29Si NMR spectrum showed a single unresolved resonance indicating little or no short-range ordering of silicon. The chemical composition of the stevensite from Jbel Rhassoul was determined to be ((Na0.25K0.20 (Mg5.04Al0.37Fe0.20&0.21)5.61(Si7.76Al0.24)8O20(OH)4). This formula differs from previous compositions described from this locality and shows it to be an Al-bearing lacustrine clay mineral

Modelling environmental factors correlated with podoconiosis: a geospatial study of non-filarial elephantiasis

Introduction The precise trigger of podoconiosis — endemic non-filarial elephantiasis of the lower legs — is unknown. Epidemiological and ecological studies have linked the disease with barefoot exposure to red clay soils of volcanic origin. Histopathology investigations have demonstrated that silicon, aluminium, magnesium and iron are present in the lower limb lymph node macrophages of both patients and non-patients living barefoot on these clays. We studied the spatial variation (variations across an area) in podoconiosis prevalence and the associated environmental factors with a goal to better understanding the pathogenesis of podoconiosis. Methods Fieldwork was conducted from June 2011 to February 2013 in 12 kebeles (administrative units) in northern Ethiopia. Geo-located prevalence data and soil samples were collected and analysed along with secondary geological, topographic, meteorological and elevation data. Soil data were analysed for chemical composition, mineralogy and particle size, and were interpolated to provide spatially continuous information. Exploratory, spatial, univariate and multivariate regression analyses of podoconiosis prevalence were conducted in relation to primary (soil) and secondary (elevation, precipitation, and geology) covariates. Results Podoconiosis distribution showed spatial correlation with variation in elevation and precipitation. Exploratory analysis identified that phyllosilicate minerals, particularly clay (smectite and kaolinite) and mica groups, quartz (crystalline silica), iron oxide, and zirconium were associated with podoconiosis prevalence. The final multivariate model showed that the quantities of smectite (RR = 2.76, 95% CI: 1.35, 5.73; p = 0.007), quartz (RR = 1.16, 95% CI: 1.06, 1.26; p = 0.001) and mica (RR = 1.09, 95% CI: 1.05, 1.13; p < 0.001) in the soil had positive associations with podoconiosis prevalence. Conclusions More quantities of smectite, mica and quartz within the soil were associated with podoconiosis prevalence. Together with previous work indicating that these minerals may influence water absorption, potentiate infection and be toxic to human cells, the present findings suggest that these particles may play a role in the pathogenesis of podoconiosis and acute adenolymphangitis, a common cause of morbidity in podoconiosis patients

Martian Fluid Evolution Recorded in Smectite from the Northwest Africa (Nwa) 817 Nakhlite Meteorite [abstract]

No abstract available

South Asian monsoon history over the past 60 kyr recorded by radiogenic isotopes and clay mineral assemblages in the Andaman Sea

The Late Quaternary variability of the South Asian (or Indian) monsoon has been linked with glacial‐interglacial and millennial scale climatic changes but past rainfall intensity in the river catchments draining into the Andaman Sea remains poorly constrained. Here we use radiogenic Sr, Nd, and Pb isotope compositions of the detrital clay‐size fraction and clay mineral assemblages obtained from sediment core NGHP Site 17 in the Andaman Sea to reconstruct the variability of the South Asian monsoon during the past 60 kyr. Over this time interval εNd values changed little, generally oscillating between −7.3 and −5.3 and the Pb isotope signatures are essentially invariable, which is in contrast to a record located further northeast in the Andaman Sea. This indicates that the source of the detrital clays did not change significantly during the last glacial and deglaciation suggesting the monsoon was spatially stable. The most likely source region is the Irrawaddy river catchment including the Indo‐Burman Ranges with a possible minor contribution from the Andaman Islands. High smectite/(illite + chlorite) ratios (up to 14), as well as low 87Sr/86Sr ratios (0.711) for the Holocene period indicate enhanced chemical weathering and a stronger South Asian monsoon compared to marine oxygen isotope stages 2 and 3. Short, smectite‐poor intervals exhibit markedly radiogenic Sr isotope compositions and document weakening of the South Asian monsoon, which may have been linked to short‐term northern Atlantic climate variability on millennial time scales

Intercalation-enhanced electric polarization and chain formation of nano-layered particles

Microscopy observations show that suspensions of synthetic and natural nano-layered smectite clay particles submitted to a strong external electric field undergo a fast and extended structuring. This structuring results from the interaction between induced electric dipoles, and is only possible for particles with suitable polarization properties. Smectite clay colloids are observed to be particularly suitable, in contrast to similar suspensions of a non-swelling clay. Synchrotron X-ray scattering experiments provide the orientation distributions for the particles. These distributions are understood in terms of competing (i) homogenizing entropy and (ii) interaction between the particles and the local electric field; they show that clay particles polarize along their silica sheet. Furthermore, a change in the platelet separation inside nano-layered particles occurs under application of the electric field, indicating that intercalated ions and water molecules play a role in their electric polarization. The resulting induced dipole is structurally attached to the particle, and this causes particles to reorient and interact, resulting in the observed macroscopic structuring. The macroscopic properties of these electro-rheological smectite suspensions may be tuned by controlling the nature and quantity of the intercalated species, at the nanoscale.Comment: 7 pages, 5 figure

Weathering microenvironments on feldspar surfaces: implications for understanding fluid-mineral reactions in soils

The mechanisms by which coatings develop on weathered grain surfaces, and their potential impact on rates of fluid-mineral interaction, have been investigated by examining feldspars from a 1.1 ky old soil in the Glen Feshie chronosequence, Scottish highlands. Using the focused ion beam technique, electron-transparent foils for characterization by transmission electron microscopy were cut from selected parts of grain surfaces. Some parts were bare whereas others had accumulations, a few micrometres thick, of weathering products, often mixed with mineral and microbial debris. Feldspar exposed at bare grain surfaces is crystalline throughout and so there is no evidence for the presence of the amorphous 'leached layers' that typically form in acid-dissolution experiments and have been described from some natural weathering contexts. The weathering products comprise sub-μm thick crystallites of an Fe-K aluminosilicate, probably smectite, that have grown within an amorphous and probably organic-rich matrix. There is also evidence for crystallization of clays having been mediated by fungal hyphae. Coatings formed within Glen Feshie soils after ∼1.1 ky are insufficiently continuous or impermeable to slow rates of fluid-feldspar reactions, but provide valuable insights into the complex weathering microenvironments on debris and microbe-covered mineral surfaces

Influence of presence of ammonium in the hydrothermal illitization of smectite

During diagenesis, several reactions induce changes both in phyllosilicates and organic matter, which in basins associated to the production of hydrocarbons leads to ammonium fixation in illite and micas [1] and to dissolution induced by organic acids [2] [3]. Dissolution processes may contribute to the smectite-to-illite transformation, stabilized by fixation of K (and NH4 +). Ammonium is a weak acid in solution. Under neutral conditions where the concentration of hydronium is very low (<10-7 M), ammonium contributes to smectite dissolution. The effect of organic acid on silicates dissolution is partially known, but the potential role of ammonium is completely novel.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Steric Effects of Alkyl Ammonium Salts on the Combustion of Exchanged Smectite Clays

Bomb calorimetry was explored as a new method for determining the cation exchange capacity (CEC) of clays. Smectite clays were modified with several alkyl ammonium salts varying in number of carbons and the spatial orientation of the carbons about the central nitrogen atom. The clays used, standards purchased from the Source Clay Repository, have CECs of 44, 80, 88, and 120 meq/100 g. Theoretically, the combustion energy of the organo-clays should be approximately the same for each salt. Any differences in energy would be due to the different structures of the salts and how they are oriented in the interlamellar region of the clay. The number of alkyl ammonium salts that bind to the negatively charged sites in the clay layers would represent the CEC of the clay. The orientation of the organic cation in the interlamellar region was examined using x-ray powder diffraction, which provides the spacing between the clay layers. The combustion energy data collected using bomb calorimetry was used to calculate the CEC of the clay by comparing the energy from the pure salts to determine the number of salt molecules intercalated into the clay. Since the pure salt and the clay have a one-to-one charge ratio, the number of salt molecules will directly represent the number of negatively charged sites on the clay which is the CEC of the clay

Towards an understanding of thermodynamic and kinetic controls on the formation of clay minerals from volcanic glass under various environmental conditions

lmogolite is the kinetically and thermodynamically favoured weathering product from rhyolitic volcanic glass in the soil-forming environment. However, on thermodynamic grounds imogolite would also appear to be the favoured alteration product of rhyolitic glass deposited in the nearshore marine environment. On the basis that the rate of conversion of glass to clay minerals is a function of the solubility of the clay mineral, smectite is expected to be formed under mildly diagenetic conditions, and formed more rapidly than imogolite in soil. The derived activation energies for formation of imogolite from glass in soils are appropriate for a diffusion controlled reaction, and appear consistent with the diffusion of the tetrahedrally co-ordinated species Al[iv](OH)₂(H2Q)⁺. In the marine environment, however the mechanism for all reactions appear to be surface reaction control