Crystal growing by electrodeposition from dense gaseous solutions

Single crystals and dendritic formations of silver are grown on platinum electrodes by electrodeposition from a dense gaseous solution of silver nitrate in ammonia. Process is modification of hydrothermal process, and also differs from standard electrodeposition by permitting single crystals to be grown from hydrogen-bonded solvents

An environmentally benign antimicrobial nanoparticle based on a silver-infused lignin core

Silver nanoparticles have antibacterial properties, but their use has been a cause for concern because they persist in the environment. Here, we show that lignin nanoparticles infused with silver ions and coated with a cationic polyelectrolyte layer form a biodegradable and green alternative to silver nanoparticles. The polyelectrolyte layer promotes the adhesion of the particles to bacterial cell membranes and, together with silver ions, can kill a broad spectrum of bacteria, including Escherichia coli, Pseudomonas aeruginosa and quaternary-amine-resistant Ralstonia sp. Ion depletion studies have shown that the bioactivity of these nanoparticles is time-limited because of the desorption of silver ions. High-throughput bioactivity screening did not reveal increased toxicity of the particles when compared to an equivalent mass of metallic silver nanoparticles or silver nitrate solution. Our results demonstrate that the application of green chemistry principles may allow the synthesis of nanoparticles with biodegradable cores that have higher antimicrobial activity and smaller environmental impact than metallic silver nanoparticles

Silver as antibacterial toward Listeria monocytogenes

Listeria monocytogenes is a serious foodborne pathogen that can contaminate food during processing and can grow during food shelf-life. New types of safe and effective food contact materials embedding antimicrobial agents, like silver, can play an important role in the food industry. The present work aimed at evaluating the in vitro growth kinetics of different strains of L. monocytogenes in the presence of silver, both in its ionic and nano form. The antimicrobial effect was determined by assaying the number of culturable bacterial cells, which formed colonies after incubation in the presence of silver nanoparticles (AgNPs) or silver nitrate (AgNO(3)). Ionic release experiments were performed in parallel. A different reduction of bacterial viability between silver ionic and nano forms was observed, with a time delayed effect exerted by AgNPs. An association between antimicrobial activity and ions concentration was shown by both silver chemical forms, suggesting the major role of ions in the antimicrobial mode of action

Biosynthesis and Characterization of Silver Nanoparticles by Aspergillus Species

Currently, researchers turn to natural processes such as using biological microorganisms in order to develop reliable and ecofriendly methods for the synthesis of metallic nanoparticles. In this study, we have investigated extracellular biosynthesis of silver nanoparticles using four Aspergillus species including A. fumigatus, A. clavatus, A. niger, and A. flavus. We have also analyzed nitrate reductase activity in the studied species in order to determine the probable role of this enzyme in the biosynthesis of silver nanoparticles. The formation of silver nanoparticles in the cell filtrates was confirmed by the passage of laser light, change in the color of cell filtrates, absorption peak at 430 nm in UV-Vis spectra, and atomic force microscopy (AFM). There was a logical relationship between the efficiencies of studied Aspergillus species in the production of silver nanoparticles and their nitrate reductase activity. A. fumigatus as the most efficient species showed the highest nitrate reductase activity among the studied species while A. flavus exhibited the lowest capacity in the biosynthesis of silver nanoparticles which was in accord with its low nitrate reductase activity. The present study showed that Aspergillus species had potential for the biosynthesis of silver nanoparticles depending on their nitrate reductase activity

Simplifying and improving the extraction of nitrate from freshwater for stable isotope analyses

Determining the isotopic composition of nitrate (NO3_) in water can prove useful to identify NO3_ sources and to understand its dynamics in aquatic systems. Among the procedures available, the ‘ionexchange resin method’ involves extracting NO3_ from freshwater and converting it into solid silver nitrate (AgNO3), which is then analysed for 15N/14N and 18O/16O ratios. This study describes a simplified methodology where water was not pre-treated to remove dissolved organic carbon (DOC) or barium cations (added to precipitate O-bearing contaminants), which suited samples with high NO3_ ($400 mM or 25 mg L_1 NO3_) and low DOC (typically <417 mM of C or 5 mg L_1 C) levels. % N analysis revealed that a few AgNO3 samples were of low purity (compared with expected % N of 8.2), highlighting the necessity to introduce quality control/quality assurance procedures for silver nitrate prepared from field water samples. Recommendations are then made to monitor % N together with % O (expected at 28.6, i.e. 3.5 fold % N) in AgNO3 in order to better assess the type and gravity of the contamination as well as to identify potentially unreliable data

Aging affects two modes of nanoleakage expression in bonded dentin

Water sorption into resin-dentin interfaces precedes hydrolytic degradation. We hypothesized that these processes are morphologically manifested by the uptake of ammoniacal silver nitrate, which is thought to trace hydrophilic domains and water-filled channels within matrices. Water sorption is thought to be nonuniform and can be traced by the use of silver nitrate. Human teeth bonded with an experimental filled-adhesive were aged in artificial saliva (experimental) or non-aqueous mineral oil (control). Specimens retrieved for up to a 12-month period were immersed in 50 wt% ammoniacal silver nitrate and examined by transmission electron microscopy for identification of the changes in their silver uptake. Reticular silver deposits initially identified within the bulk of hybrid layers in the experimental group were gradually reduced over time, but were subsequently replaced by similar deposits that were located along the hybrid layer-adhesive interface. Silver uptake in water-binding domains of the adhesive layers increased with aging, resulting in water tree formation. These water-filled channels may act as potential sites for hydrolytic degradation of resin-dentin bonds.published_or_final_versio

Inactivation of the antibacterial and cytotoxic properties of silver ions by biologically relevant compounds

There has been a recent surge in the use of silver as an antimicrobial agent in a wide range of domestic and clinical products, intended to prevent or treat bacterial infections and reduce bacterial colonization of surfaces. It has been reported that the antibacterial and cytotoxic properties of silver are affected by the assay conditions, particularly the type of growth media used in vitro. The toxicity of Ag+ to bacterial cells is comparable to that of human cells. We demonstrate that biologically relevant compounds such as glutathione, cysteine and human blood components significantly reduce the toxicity of silver ions to clinically relevant pathogenic bacteria and primary human dermal fibroblasts (skin cells). Bacteria are able to grow normally in the presence of silver nitrate at >20-fold the minimum inhibitory concentration (MIC) if Ag+ and thiols are added in a 1:1 ratio because the reaction of Ag+ with extracellular thiols prevents silver ions from interacting with cells. Extracellular thiols and human serum also significantly reduce the antimicrobial activity of silver wound dressings Aquacel-Ag (Convatec) and Acticoat (Smith & Nephew) to Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli in vitro. These results have important implications for the deployment of silver as an antimicrobial agent in environments exposed to biological tissue or secretions. Significant amounts of money and effort have been directed at the development of silver-coated medical devices (e.g. dressings, catheters, implants). We believe our findings are essential for the effective design and testing of antimicrobial silver coatings

A comparison of the antimicrobial efficacy of silver diamine fluoride and silver nitrate: an ex vivo study

A comparison of the antimicrobial efficacy of silver diamine fluoride and silver nitrate on various cariogenic bacteria: an ex vivo study By: Reham AlNajjar, D.D.S. A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University. Virginia Commonwealth University, 2019 Thesis Advisor: William Dahlke, D.M.D., Associate Professor and Chair of Pediatric Dentistry, School of Dentistry Purpose: The use of silver-based antimicrobials is an emerging method for the treatment of dental caries. In this study, the authors compare the efficacy of the two most prominent silver- based therapeutics, silver diamine fluoride (SDF) and silver nitrate (AgNO3), on cariogenic and non-cariogenic multispecies biofilms. Currently there is a lack of studies comparing the efficacy of SDF to AgNO3. Methods: Plaque samples from anterior and posterior tooth sites from children presenting both with early childhood caries and caries-free children were collected, pooled, and utilized to create four ex vivo biofilm systems in artificial saliva. SDF and AgNO3 were administered to these biofilms and bacterial survival was quantified and compared to untreated controls. Results: Each of the four pooled sample types was applied to plates coated in artificial saliva + 1% sucrose. Both SDF and AgNO3 were very effective against plaque derived biofilms when compared to untreated biofilms (P0.05) in the potency of each compound. Conclusions: SDF and AgNO3 significantly inhibit ex vivo cariogenic and non-cariogenic biofilms at similar levels

C-banding, fluorescent staining and NOR location in holokinetic chromosomes of bugs of the Neotropical genus Antiteuchus (Heteroptera: Pentatomidae: Discocephalinae)

Different cytogenetic techniques including C-banding, base-specific fluorochromes and silver nitrate staining were used to compare the karyotypes of three species of bugs, representatives of the Neotropical genus Antiteuchus, namely A. mixtus, A. sepulcralis and A. macraspis. The species have holokinetic chromosomes which is typical of the Hemiptera, and their diploid chromosome number is 2n = 14 and they have an XX/XY (female/male) sex chromosome system. C-banding revealed telomeric blocks of constitutive heterochromatin in most chromosomes of these three species. In each species, CMA;-positive blocks were observed in the telomeric heterochromatin region of chromosome pair 1. This chromosome pair carried the nucleolar organizer region (NOR), which silver nitrate staining revealed is located in the telomeric heterochromatin. In contrast to the result obtained with CMA3, entire chromosome complement stained homogenously with DAPI, except for the telomeric region of pair 1, which remained unstained.Fil: Lanzone, Cecilia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza. Instituto Argentino de Investigaciones de las Zonas Áridas. Provincia de Mendoza. Instituto Argentino de Investigaciones de las Zonas Áridas. Universidad Nacional de Cuyo. Instituto Argentino de Investigaciones de las Zonas Áridas; Argentina. Universidade Federal de Pernambuco; BrasilFil: de Souza, Maria José. Universidade Federal de Pernambuco; Brasi

Efficient syntheses of climate relevant isoprene nitrates and (1R,5S)-(−)-myrtenol nitrate

Here we report the chemoselective synthesis of several important, climate relevant isoprene nitrates using silver nitrate to mediate a ’halide for nitrate’ substitution. Employing readily available starting materials, reagents and Horner–Wadsworth–Emmons chemistry the synthesis of easily separable, synthetically versatile ‘key building blocks’ (E)- and (Z)-3-methyl-4-chlorobut-2-en-1-ol as well as (E)- and (Z)-1-((2-methyl-4-bromobut-2-enyloxy)methyl)-4-methoxybenzene has been achieved using cheap, ’off the shelf’ materials. Exploiting their reactivity we have studied their ability to undergo an ‘allylic halide for allylic nitrate’ substitution reaction which we demonstrate generates (E)- and (Z)-3-methyl-4-hydroxybut-2-enyl nitrate, and (E)- and (Z)-2-methyl-4-hydroxybut-2-enyl nitrates (‘isoprene nitrates’) in 66–80% overall yields. Using NOESY experiments the elucidation of the carbon–carbon double bond configuration within the purified isoprene nitrates has been established. Further exemplifying our ‘halide for nitrate’ substitution chemistry we outline the straightforward transformation of (1R,2S)-(−)-myrtenol bromide into the previously unknown monoterpene nitrate (1R,2S)-(−)-myrtenol nitrate