Fault-tolerant onboard digital information switching and routing for communications satellites

The NASA Lewis Research Center is developing an information-switching processor for future meshed very-small-aperture terminal (VSAT) communications satellites. The information-switching processor will switch and route baseband user data onboard the VSAT satellite to connect thousands of Earth terminals. Fault tolerance is a critical issue in developing information-switching processor circuitry that will provide and maintain reliable communications services. In parallel with the conceptual development of the meshed VSAT satellite network architecture, NASA designed and built a simple test bed for developing and demonstrating baseband switch architectures and fault-tolerance techniques. The meshed VSAT architecture and the switching demonstration test bed are described, and the initial switching architecture and the fault-tolerance techniques that were developed and tested are discussed

Application of multiple resistive superconducting fault-current limiters for fast fault detection in highly interconnected distribution systems

Superconducting fault-current limiters (SFCLs) offer several benefits for electrical distribution systems, especially with increasing distributed generation and the requirements for better network reliability and efficiency. This paper examines the use of multiple SFCLs in a protection scheme to locate faulted circuits, using an approach which is radically different from typical proposed applications of fault current limitation, and also which does not require communications. The technique, referred to as “current division discrimination” (CDD), is based upon the intrinsic inverse current-time characteristics of resistive SFCLs, which ensures that only the SFCLs closest to a fault operate. CDD is especially suited to meshed networks and particularly when the network topology may change over time. Meshed networks are expensive and complex to protect using conventional methods. Simulation results with multiple SFCLs, using a thermal-electric superconductor model, confirm that CDD operates as expected. Nevertheless, CDD has limitations, which are examined in this paper. The SFCLs must be appropriately rated for the maximum system fault level, although some variation in actual fault level can be tolerated. For correct coordination between SFCLs, each bus must have at least three circuits that can supply fault current, and the SFCLs should have identical current-time characteristics

Beacon Synchronization for GTS Collision Avoidance in an IEEE 802.15.4 Meshed Network

International audienceIndustrial process control architectures are generally composed of nodes organized in a cluster-tree. Today, wired communications between nodes enable guaranteeing the constraint respect attached to determinism. Innovations in wireless technology allow using these new technologies instead of wired systems. IEEE 802.15.4 standard meet industrial local network needs, but it does not propose any mechanisms to avoid beacon and GTS (Guaranteed Time Slot ) collisions in meshed network. This communication proposes a new synchronization method for beacons and GTSs in meshed networks using IEEE 802.15.4

Efficient Load Flow Techniques Based on Holomorphic Embedding for Distribution Networks

The Holomorphic Embedding Load flow Method (HELM) employs complex analysis to solve the load flow problem. It guarantees finding the correct solution when it exists, and identifying when a solution does not exist. The method, however, is usually computationally less efficient than the traditional Newton-Raphson algorithm, which is generally considered to be a slow method in distribution networks. In this paper, we present two HELM modifications that exploit the radial and weakly meshed topology of distribution networks and significantly reduce computation time relative to the original HELM implementation. We also present comparisons with several popular load flow algorithms applied to various test distribution networks.Comment: Accepted for publication in the Proceedings of 2019 IEEE PES General Meeting, 5 Page

Dimensioning of an European backbone network in OPNET WDM Guru

C

Allocating Transmission to Mitigate Market Power in Electricity Networks

Allocating Transmission to Mitigate Market Power in Electricity Network

Optimal Topology Design for Disturbance Minimization in Power Grids

The transient response of power grids to external disturbances influences their stable operation. This paper studies the effect of topology in linear time-invariant dynamics of different power grids. For a variety of objective functions, a unified framework based on $H_2$ norm is presented to analyze the robustness to ambient fluctuations. Such objectives include loss reduction, weighted consensus of phase angle deviations, oscillations in nodal frequency, and other graphical metrics. The framework is then used to study the problem of optimal topology design for robust control goals of different grids. For radial grids, the problem is shown as equivalent to the hard "optimum communication spanning tree" problem in graph theory and a combinatorial topology construction is presented with bounded approximation gap. Extended to loopy (meshed) grids, a greedy topology design algorithm is discussed. The performance of the topology design algorithms under multiple control objectives are presented on both loopy and radial test grids. Overall, this paper analyzes topology design algorithms on a broad class of control problems in power grid by exploring their combinatorial and graphical properties.Comment: 6 pages, 3 figures, a version of this work will appear in ACC 201

Multichannel demultiplexer/demodulator technologies for future satellite communication systems

NASA-Lewis' Space Electronics Div. supports ongoing research in advanced satellite communication architectures, onboard processing, and technology development. Recent studies indicate that meshed VSAT (very small aperture terminal) satellite communication networks using FDMA (frequency division multiple access) uplinks and TDMA (time division multiplexed) downlinks are required to meet future communication needs. One of the critical advancements in such a satellite communication network is the multichannel demultiplexer/demodulator (MCDD). The progress is described which was made in MCDD development using either acousto-optical, optical, or digital technologies

Increasing Distributed Generation Penetration using Soft Normally-Open Points

This paper considers the effects of various voltage control solutions on facilitating an increase in allowable levels of distributed generation installation before voltage violations occur. In particular, the voltage control solution that is focused on is the implementation of `soft' normally-open points (SNOPs), a term which refers to power electronic devices installed in place of a normally-open point in a medium-voltage distribution network which allows for control of real and reactive power flows between each end point of its installation sites. While other benefits of SNOP installation are discussed, the intent of this paper is to determine whether SNOPs are a viable alternative to other voltage control strategies for this particular application. As such, the SNOPs ability to affect the voltage profile along feeders within a distribution system is focused on with other voltage control options used for comparative purposes. Results from studies on multiple network models with varying topologies are presented and a case study which considers economic benefits of increasing feasible DG penetration is also given

Multilevel MDA-Lite Paris Traceroute

Since its introduction in 2006-2007, Paris Traceroute and its Multipath Detection Algorithm (MDA) have been used to conduct well over a billion IP level multipath route traces from platforms such as M-Lab. Unfortunately, the MDA requires a large number of packets in order to trace an entire topology of load balanced paths between a source and a destination, which makes it undesirable for platforms that otherwise deploy Paris Traceroute, such as RIPE Atlas. In this paper we present a major update to the Paris Traceroute tool. Our contributions are: (1) MDA-Lite, an alternative to the MDA that significantly cuts overhead while maintaining a low failure probability; (2) Fakeroute, a simulator that enables validation of a multipath route tracing tool's adherence to its claimed failure probability bounds; (3) multilevel multipath route tracing, with, for the first time, a Traceroute tool that provides a router-level view of multipath routes; and (4) surveys at both the IP and router levels of multipath routing in the Internet, showing, among other things, that load balancing topologies have increased in size well beyond what has been previously reported as recently as 2016. The data and the software underlying these results are publicly available.Comment: Preprint. To appear in Proc. ACM Internet Measurement Conference 201