Thermal treatment and mechanical properties of aluminum-2021

Mechanical properties, after thermal treatments, are summarized for sheet and plate of copper-rich, high-strength, heat-treatable aluminum-2021. The alloy is quench sensitive, quench rate and variations in aging affect corrosion behavior. Aging effects on yield strength, tensile strength, and elongation of sheet and plate are compared

Determination of wood strength properties through standard test procedures

In this study a review of existing recognised standards for wood mechanical testing was conducted. This review considers tensile, compressive, bending and shear test methodologies from a range of sources. In addition, values for wood mechanical properties were obtained through controlled experimentation using a universal material testing machine. Selected standard procedures were used to obtain wood strength properties both along and across the grain. These consist of a three point bending procedure used to evaluate the wood strength across the grain and a longitudinal shear procedure used to evaluate the wood strength along the grain. Strength properties obtained through controlled experimentation are compared to values available in existing literature with little discrepancy

Controlled intermittent interfacial bond concept for composite materials

Concept will enhance fracture resistance of high-strength filamentary composite without degrading its tensile strength or elastic modulus. Concept provides more economical composite systems, tailored for specific applications, and composite materials with mechanical properties, such as tensile strength, fracture strain, and fracture toughness, that can be optimized

Effect of Chemically Modified Banana Fibers on the Mechanical Properties of Poly-Dimethyl-Siloxane-Based Composites

The study presents the mechanical properties of polymer-based composites reinforced with chemically modified banana fibers, by alkalization in different concentrations of sodium hydroxide (NaOH). The fiber weight fraction has a great effect on the mechanical properties of the composites. Stiff composites were obtained at 6 wt% fiber fractions with Young’s modulus of 254.00 ±12.70 MPa. Moreover, the yield strength was 35.70 ±1.79 MPa at 6 wt% fiber fractions. However, the ultimate tensile strength (UTS) and toughness of the composites were obtained at 5 wt% fiber fractions. Statistical analyses were used to ascertain the significant different on the mechanical properties of the fibers and composites. The implication of the results is then discussed for potential applications of PDMS-based composites reinforced with chemically modified banana fibers

Tunable photon blockade in a hybrid system consisting of an optomechanical device coupled to a two-level system

We study photon blockade and anti-bunching in the cavity of an optomechanical system in which the mechanical resonator is coupled to a two-level system (TLS). In particular, we analyze the effects of the coupling strength (to the mechanical mode), transition frequency, and decay rate of TLS on the photon blockade. The statistical properties of the cavity field are affected by the TLS, because the TLS changes the energy-level structure of the optomechanical system via dressed states formed by the TLS and the mechanical resonator. We find that the photon blockade and tunneling can be significantly changed by the transition frequency of the TLS and the coupling strength between the TLS and the mechanical resonator. Therefore, our study provides a method to tune the photon blockade and tunneling using a controllable TLS.Comment: 11 page

The resistance of selected high strength alloys to embrittlement by a hydrogen environment

Selected high strength iron base and cobalt base alloys were resistant to degradation of mechanical properties in a one atmosphere hydrogen environment at ambient temperature. These alloys were strengthened initially by cold working which produced strain induced martensite and fcc mechanical twins in an fcc matrix. Heat treatment of the cobalt base alloy after cold working produced carbide precipitates with retention of an hcp epsilon phase which increased the yield strength level. High strength alloys can be produced which have some resistance to degradation of mechanical properties by a hydrogen environment under certain conditions

Study of the Mechanical Strength Improvement of Wafers for EWT Solar Cells by Chemical Etching after the Drilling Process

Mechanical stability of EWT solar cells deteriorates when holes are created in the wafer. Nevertheless, the chemical etching after the hole generation process improves the mechanical strength by removing part of the damage produced in the drilling process. Several sets of wafers with alkaline baths of different duration have been prepared. The mechanical strength has been measured by the ring on ring bending test and the failure stresses have been obtained through a FE simulation of the test. This paper shows the comparison of these groups of wafers in order to obtain an optimum value of the decreased thickness produced by the chemical etchin

Evaluation of the mechanical properties of self compacting concrete using current estimating models. Estimating the modulus of elasticity, tensile strength, and modulus of rupture of self compacting concrete

This study includes an analysis of the applicability of current models used for estimating the mechanical properties of conventional concrete to self-compacting concrete. The mechanical properties evaluated are: modulus of elasticity, tensile strength, and modulus of rupture. An extensive database which included the dosifications and the mechanical properties of 627 mixtures from 138 different references, was used. The models considered are: ACI, EC-2, NZS 3101:2006 (New Zealand code) and the CSA A23.3-04 (Canadian code). The precision in estimating the modulus of elasticity and tensile strength is acceptable for all models; however, all models are less precise in estimating the modulus of rupture