Effects of hydrolysis ageing on the performance and dimensional stability of glass-fiber reinforced polyamide 66

Results of an in-depth study of hydrolysis testing on the mechanical performance, weight change, and dimensional stability of injection moulded glass-fiber reinforced polyamide 66 automotive composites are presented. Composite and resin samples have been characterised after conditioning in water-glycol mixtures at 70°C, 120°C and 150°C for a range of times up to 1000 hours. The results reveal that hydrothermal ageing results in significant changes in the mechanical performance, weight, and dimensions of these materials. Mechanical performance after conditioning at different temperatures could be superimposed when considered as a function of the level of fluid absorbed by the composite matrix

Finite Size Effect on Nanomechanical Mass Detection: Role of Surface Elasticity

Nanomechanical resonators have recently been highlighted because of their remarkable ability to perform the sensing and detection. Since the nanomechanical resonators are characterized by large surface-to-volume ratio, it is implied that the surface effect plays a substantial role on not only the resonance but also the sensing performance of nanomechanical resonators. In this work, we have studied the role of surface effect on the detection sensitivity of a nanoresonator that undergoes either harmonic vibration or nonlinear oscillation based on the continuum elastic model such as beam model. It is shown that surface effect makes an impact on both harmonic resonance and nonlinear oscillations, and that the sensing performance is dependent on the surface effect. Moreover, we have also investigated the surface effect on the mechanical tuning of resonance and sensing performance. It is interestingly found that the mechanical tuning of resonance is independent of surface effect, and that the mechanical tuning of sensing performance is determined by surface effect. Our study sheds light on the importance of surface effect on the sensing performance of nanoresonators

Multiscale, thermomechanical topology optimization of self-supporting cellular structures for porous injection molds

Purpose This paper aims to establish a multiscale topology optimization method for the optimal design of non-periodic, self-supporting cellular structures subjected to thermo-mechanical loads. The result is a hierarchically complex design that is thermally efficient, mechanically stable and suitable for additive manufacturing (AM). Design/methodology/approach The proposed method seeks to maximize thermo-mechanical performance at the macroscale in a conceptual design while obtaining maximum shear modulus for each unit cell at the mesoscale. Then, the macroscale performance is re-estimated, and the mesoscale design is updated until the macroscale performance is satisfied. Findings A two-dimensional Messerschmitt Bolkow Bolhm (MBB) beam withstanding thermo-mechanical load is presented to illustrate the proposed design method. Furthermore, the method is implemented to optimize a three-dimensional injection mold, which is successfully prototyped using 420 stainless steel infiltrated with bronze. Originality/value By developing a computationally efficient and manufacturing friendly inverse homogenization approach, the novel multiscale design could generate porous molds which can save up to 30 per cent material compared to their solid counterpart without decreasing thermo-mechanical performance. Practical implications This study is a useful tool for the designer in molding industries to reduce the cost of the injection mold and take full advantage of AM

The thermo-mechanical performance of glass-fibre reinforced Polyamide 66 during glycol-water hydrolysis conditioning

Injection moulded glass-fibre reinforced polyamide 66 composites based on two glass fibre products with different sizing formulations and unreinforced polymer samples have been characterised by dynamic mechanical analysis and unnotched Charpy impact testing both dry as moulded and during conditioning in a glycol-water mixture at 70°C for a range of times up to 400 hours. Simultaneously weight and dimension changes of these materials have been recorded. The results reveal that hydrothermal ageing in glycol-water mixtures causes significant changes in the thermo-mechanical performance of these materials. It is shown that mechanical performance obtained after conditioning at different temperatures can be superimposed when considered as a function of the level of fluid absorbed by the composite polymer matrix

On the Energy Transfer Performance of Mechanical Nanoresonators Coupled with Electromagnetic Fields

We study the energy transfer performance in electrically and magnetically coupled mechanical nanoresonators. Using the resonant scattering theory, we show that magnetically coupled resonators can achieve the same energy transfer performance as for their electrically coupled counterparts, or even outperform them within the scale of interest. Magnetic and electric coupling are compared in the Nanotube Radio, a realistic example of a nano-scale mechanical resonator. The energy transfer performance is also discussed for a newly proposed bio-nanoresonator composed of a magnetosomes coated with a net of protein fibers.Comment: 9 Pages, 3 Figure

SAW torque transducers for disturbance rejection and tracking control of multi-inertia servo-drive systems

The paper proposes a resonance ratio control (RRC) technique for the coordinated motion control of multi-inertia mechanical systems, based on the measurement of shaft torque via a SAW-based torque sensor. Furthermore, a new controller structure, RRC plus disturbance feedback is proposed, which enables the controller to be designed to independently satisfy tracking and regulation performance. A tuning method for the RRC structure is given based on the ITAE index, normalized as a function of the mechanical parameters enabling a direct performance comparison between a basic proportional and integral (PI) controller. The use of a reduced-order state observer is presented to provide a dynamic estimate of the load-side disturbance torque for a multi-inertia mechanical system, with an appraisal of the composite closed-loop dynamics. It is shown that the integrated formulation of the tuning criteria enables lower bandwidth observers to be implemented with a corresponding reduction in noise and computational load. The control structures are experimentally validated via a purpose designed test facility and demonstrate significant improvement in dynamic tracking performance, whilst additionally rejecting periodic load side disturbances, a feature previously unrealisable except by other, high-gain control schemes that impose small stability margins

Effect of Morphological Changes due to Increasing Carbon Nanoparticles Content on the Quasi-Static Mechanical Response of Epoxy Resin

Mechanical failure in epoxy polymer and composites leads them to commonly be referred to as inherently brittle due to the presence of polymerization-induced microcrack and microvoids, which are barriers to high-performance applications, e.g., in aerospace structures. Numerous studies have been carried out on epoxy's strengthening and toughening via nanomaterial reinforcement, e.g., using rubber nanoparticles in the epoxy matrix of new composite aircraft. However, extremely cautious process and functionalization steps must be taken in order to achieve high-quality dispersion and bonding, the development of which is not keeping pace with large structures applications. In this article, we report our studies on the mechanical performance of an epoxy polymer reinforced with graphite carbon nanoparticles (CNPs), and the possible effects arising from a straightforward, rapid stir-mixing technique. The CNPs were embedded in a low viscosity epoxy resin, with the CNP weight percentage (wt %) being varied between 1% and 5%. Simplified stirring embedment was selected in the interests of industrial process facilitation, and functionalization was avoided to reduce the number of parameters involved in the study. Embedment conditions and timing were held constant for all wt %. The CNP filled epoxy resin was then injected into an aluminum mold and cured under vacuum conditions at 80 °C for 12 h. A series of test specimens were then extracted from the mold, and tested under uniaxial quasi-static tension, compression, and nanoindentation. Elementary mechanical properties including failure strain, hardness, strength, and modulus were measured. The mechanical performance was improved by the incorporation of 1 and 2 wt % of CNP but was degraded by 5 wt % CNP, mainly attributed to the morphological change, including re-agglomeration, with the increasing CNP wt %. This change strongly correlated with the mechanical response in the presence of CNP, and was the major governing mechanism leading to both mechanical improvement and degradation

Jump Training Analysis: An Application in Strength and Conditioning

Force development is a crucial part of sports performance. Jumping is a mechanical movement used in various sports to analyze force production. Strength and Conditioning coaches work with athletes on improving sports performance through a variety of exercises. The mechanical principles utilized in jump training will help coaches train athletes to excel. Research has analyzed the various components of jumping that could substantially improve the rate of force development. Studies about the mechanisms of jumping will consist of devices used to measure force, phases of the jump, neuromuscular control of jumping and exercises to help athletes improve. The following thesis will include a review of jumping as well as an application strength and conditioning coach’s use in the weight room